Request Quote

  Home > Production Tools > Flasher (Programmer) >

Flasher Portable PLUS (5.16.02)
Flasher Portable PLUS Image

Images are for reference only.
See Product Specifications.
Alternative Views:


Request Volume Discount
Pre-Order Now Ships in 10 Business Days
Product Code: 5.16.02

Optional Adapter

2mm Adapter (8.06.11) [Add €49.00]

14-Pin TI Adapter (8.06.03) [Add €49.00]

Signal Smoothing Adapter (8.06.12) [Add €49.00]

TI-CTI-20 Adapter (8.06.06) [Add €49.00]

SiLabs C2 Adapter (8.06.17) [Add €49.00]

Measurement+Patch Adapter (8.06.13) [Add €98.00]

Altera Adapter (8.06.15) [Add €49.00]

14-Pin ARM Adapter (8.08.01) [Add €49.00]

USB Isolator (8.07.02) [Add €148.00]

SWD Isolator (8.07.01) [Add €198.00]

JTAG Isolator (8.07.00) [Add €198.00]

10-Pin Needle Adapter (8.06.05) [Add €59.00]

J-Link 10-pin Needle Adapter (8.06.04) [Add €79.00]

J-Link 6-pin Needle Adapter (8.06.16) [Add €79.00]

Description Technical Specs

The Flasher Portable PLUS is a new member to the widely popular SEGGER Flasher family. It comes with an 1,8'' LCD to display additional information on the programming process.
For untethered stand-alone operation, the new Flasher uses a rechargeable 680 mAh Li-Ion-battery for up to 10 hours operation time.

Due to the integrated 128mb flash memory, the Flasher Portable PLUS can be loaded with up to 8 firmware images and configuration files. The ability to store multiple images provides the freedom to carry updates for different devices and/or different revisions for the same device inside one small box. The user interface contains a select and a program button with direct feedback via the LCD display built into the device.

Like Flasher ARM, Flasher PRO and Flasher Portable, the Flasher Portable PLUS is an in-circuit-programmer based on the J-Link family of debug probes using the same ultra-fast flash programming algorithms.

Supports ARM, Cortex, PowerPC and Renesas RX cores. For a complete list, please refer to the Supported Device List. This device comes with a license for the software item 8.08.02 J-Flash, which is the software used to configure the Flasher Portable PLUS. Flash memory stores the target program and target information. It can store multiple programming images. A target system is required.


  • Flasher Portable PLUS
  • 20 Pin 0.1" Ribbon Cable
  • USB Cable
  • Li-Ion Battery

Browse for more products in the same category as this item:

Production Tools > Flasher (Programmer)