You are here: Home > Production Tools > Flasher (Programmer)

Flash Programmer (Flasher®)

Flasher is a line of Production Flash Programming tools available for ARM, Cortex, PowerPC, Renesas, ST Microelectronics, and Toshiba devices. The Flasher family eases the implementation into a production site by allowing the flash programming to be triggered manually or remotely.

Main Features

  • Once Set Up, Flasher can be Controlled Without the Use of PC Application

Sort By:
Page of 1
Flasher Secure Flasher SECURE (5.20.01)

Secure Flash Programmer

Flasher Secure is a mass production programming system, capable of protecting the vendor’s IP regardless of the production site. It provides full control over the programming process at contract manufacturers (CM) and similar environments.

Price: €995.00
5.20.10 Flasher Secure Starter Kit Required
SEGGER Flasher ATE Main Board Module Flasher ATE Main Module (5.18.01)

Flasher ATE - Main Module - Modular Gang Programmer

  • In-System Programmer (ISP)
  • Ultra fast programming
  • Control interfaces for ATEs and similar production process handlers
  • Switchable target power
  • J-Flash for an easy setup
  • Scalable solution with up to 10 individual channels
  • Parallel channels, no demultiplexing required

Price: €980.00
SEGGER Flasher PRO Flasher PRO (5.17.01)

ARM7/9/11, Cortex, RX and PPC Flash Programmer

Programming tool for ARM, Renesas RX and Freescale PowerPC
based series of microcontrollers.
Supports stand-alone programming (without the need of a PC) of internal and external flash memory.

Price: €798.00
Flasher Portable PLUS Image Flasher Portable PLUS (5.16.02)

ARM, Cortex, PowerPC, Renesas RX, Renesas RL78 Flash Programmer

Portable stand-alone programming tool for in-field updates. Flash memory stores the target program and target information. A target system is required.

Price: €598.00
Flasher ARM Flasher ARM (5.07.01)

ARM/Cortex Flash Programmer

JTAG/SWD debug probe and stand-alone programming tool for ARM microcontrollers. Flash memory stores the target program and target information. A target system is required.

Price: €598.00
Flasher ST7 Flasher ST7 (5.04.01)

ST Flash Programmer

Programming tool for ST Microelectronics ST7 series of microcontrollers. This tool allows programming of MCU via synchronous serial interface in circuit only. A target system is required.

Price: €598.00
SEGGER Flasher ATE Programming Module Flasher ATE Programming Module (5.18.02)

Flasher ATE - Programming Module - Modular Gang Programmer

  • In-System Programmer (ISP)
  • Ultra fast programming
  • Control interfaces for ATEs and similar production process handlers
  • Switchable target power
  • J-Flash for an easy setup
  • Scalable solution with up to 10 individual channels
  • Parallel channels, no demultiplexing required

Price: €498.00
Flasher 5 PRO Flasher 5 PRO (5.05.10)

Renesas Flash Programmer

Programming tool for Renesas M16C/62, M16C/80, M32C, M79, R32C, R8C series of microcontrollers. This tool allows programming of MCU via serial synchronous or asynchronous interface in circuit only. A target system is required.

Price: €498.00
Flasher STM8 Flasher STM8 (5.09.01)

STM8 Flash Programmer

Programming tool for ST Microelectronics STM8 microcontrollers. Flash memory stores the target program. USB, Ethernet, RS232 and standard 4-pin SWIM ribbon cable included. Windows PC software included.

Price: €498.00
Flasher 5 Flasher 5 (5.05.01)

Renesas Flash Programmer

Programming tool for Renesas M16C/20, M16C/62, M16C/80 and 740, 38000, M79, M38, and ST9 series of microcontrollers. This tool allows programming of MCU via synchronous serial interface in circuit only. A target system is required.

Price: €498.00