Go to homepage
€0.00*
Menu
Skip image gallery
Image of a rectangular device labeled "Flasher" with the tagline "The in-circuit programmer!" and "ARM". The device has a gray front with rounded edges and a blue rubber case, along with a logo indicating "SEGGER" at the bottom.
A blue and gray device labeled "Flasher" serves as an in-circuit programmer for ARM systems. It features buttons labeled "PROG" and indicators for "Ready," "Not ready," and "Fail." The design is compact and intended for electronic programming tasks.
A rectangular device labeled "Flasher" from SEGGER, used for in-circuit programming of ARM microcontrollers. The device has a gray top with blue edges, featuring status indicators: "Ready," "Not ready," and "Fail," along with a programming button labeled "PROG." The back has a connector port.
An electronic device with a blue and gray casing labeled "Flasher." It features indicator lights and ports for connection. The device is used for programming and interfacing with other hardware systems.
The image shows a blue and gray electronic device labeled "J-Link Plus" with various ports on one side. It is designed for programming and debugging embedded systems. The device has LED indicators to show operational status.
An electronic device labeled "Flasher" designed for in-circuit programming, specifically for ARM. It features a gray and blue casing with indicators for status: "Ready," "OK," "Not ready," and "Fail," along with a "PROG" button. The device connects via a standard interface.
Image of a rectangular device labeled "Flasher" with the tagline "The in-circuit programmer!" and "ARM". The device has a gray front with rounded edges and a blue rubber case, along with a logo indicating "SEGGER" at the bottom.
A blue and gray device labeled "Flasher" serves as an in-circuit programmer for ARM systems. It features buttons labeled "PROG" and indicators for "Ready," "Not ready," and "Fail." The design is compact and intended for electronic programming tasks.
A rectangular device labeled "Flasher" from SEGGER, used for in-circuit programming of ARM microcontrollers. The device has a gray top with blue edges, featuring status indicators: "Ready," "Not ready," and "Fail," along with a programming button labeled "PROG." The back has a connector port.
An electronic device with a blue and gray casing labeled "Flasher." It features indicator lights and ports for connection. The device is used for programming and interfacing with other hardware systems.
The image shows a blue and gray electronic device labeled "J-Link Plus" with various ports on one side. It is designed for programming and debugging embedded systems. The device has LED indicators to show operational status.
An electronic device labeled "Flasher" designed for in-circuit programming, specifically for ARM. It features a gray and blue casing with indicators for status: "Ready," "OK," "Not ready," and "Fail," along with a "PROG" button. The device connects via a standard interface.

Flasher ARM

Deprecated product. Please order Flasher Pro instead. The Flasher Pro support includes all devices that can be programmed with a Flasher Arm.

€798.00*

Prices excl. VAT plus shipping costs

No longer available

Support options
Part number: 5.07.01
Description

Product information "Flasher ARM"

Get Flasher Pro, which replaces the Flasher Arm. For more information please visit www.segger.com
Properties
Host Interface: Ethernet, UART/RS232, USB
Programming Trigger: Button, Flasher Hub, J-Flash, TTL, Telnet, Terminal, UART
Supported Targets: ARM Cortex Cores, ARM legacy Cores
Target Interface: JTAG, SPD, SWD
Skip product gallery

Similar products

A rectangular device labeled "Flasher Pro" prominently features a silver background with black text. Below, the SEGGER logo is displayed. The device is encased in a blue rubber material, designed for in-circuit programming. A rectangular device labeled "Flasher Pro" with a gray front and blue sides. It features three status indicators (Ready, Not Ready, Fail) and a "PROG" button. The brand "SEGGER" is also displayed. This device is used for in-circuit programming.
Flasher Pro
Get Flasher Pro, a fast and reliable in-system programming tool for embedded systems from the SEGGER Flasher family of programming tools.Flasher Pro is built to program any on-chip or external flash memory in microcontroller- and micropocessor-based systems. This efficient programming tool may operate with a controlling host PC or stand-alone. It is cross-platform, working on Linux, Windows, and macOS.To operate stand-alone, just set it up, then it can be controlled without the use of a PC program. It has an Ethernet, USB and RS232 interface for configuration and control.Flasher Pro supports a wide range of CPU cores and an even wider range of different devices from various vendors. On this page, an overview of all supported CPU cores, as well as devices for which flash programming is supported, is given. The Flasher PRO comes with a built-in 20-pin connector, that can easily be adapted to any target interface.Further advantagesEach Flasher includes licenses to program with all supported MCUs and supports serial in target programming. It comes with free firmware updates.Package content Flasher Pro20-pin, 0.1" ribbon cableUSB cable Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible. For additional product information, please visit segger.com.

From €998.00*
Details
A rectangular device with a gray surface labeled "Flasher" and "Pro XL" underneath, featuring the tagline "The in-circuit programmer!" The device has a blue protective casing and a SEGGER logo at the bottom. It is designed for programming electronic circuits. Image of a blue in-circuit programmer labeled "Flasher Pro XL" by SEGGER. The device features indicator lights and buttons, indicating operational status—"Ready," "Not Ready," and "Fail." The main label highlights the product name and its purpose as a programming tool.
Flasher Pro XL
Get the Flasher Pro XL, the storage-extended version of Flasher Pro. It provides 2GB of on-board storage for programming large images and configurations.Flasher Pro XL is a fast and reliable in-system programming tool for embedded systems from the SEGGER Flasher family of programming tools. Flasher Pro XL is built to program any on-chip or external flash memory in microcontroller- and micropocessor-based systems. This efficient programming tool may operate with a controlling host PC or stand-alone. It is cross-platform, working on Linux, Windows, and macOS. To operate stand-alone, just set it up, and then it can be controlled without the use of a PC program. It has an Ethernet, USB, and RS232 interface for configuration and control.Flasher Pro XL supports a wide range of CPU cores and an even wider range of different devices from various vendors. On this page, an overview of all supported CPU cores, as well as devices for which flash programming is supported, is given. The Flasher Pro XL comes with a built-in 20-pin connector, that can easily be adapted to any target interface.Further advantagesEach Flasher includes licenses to program with all supported MCUs and supports serial in target programming. It comes with free firmware updates.Package content Flasher Pro XL 20-pin, 0.1" target ribbon cable USB cable Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible. For additional product information, please visit segger.com.

From €1,198.00*
Details
Bestseller
A blue rectangular device labeled "Flasher" with a grey front. It features the SEGGER logo, status indicators labeled "Ready / O.K." and "Not ready / Fail," and a button marked "PROG." It is designed for in-circuit programming. Image features a compact SEGGER in-circuit programmer labeled "Flasher." It includes status indicators for "Ready / O.K." and "Not ready / Fail," along with a "PROG" button. The device has a rectangular shape with a blue border and a gray center.
Flasher Compact
Get Flasher Compact, the compact version of the Flasher PRO for easier integration into size limited production setups. Thanks to its compact form factor, Flasher Compact allows for easy integration into size-constrained project setups. In combination with the Flasher Hub-4 or Flasher Hub-12 the Flasher Compact is a powerful gang programming solution.Flasher Compact is built to program any on-chip or external flash memory in microcontroller- and micropocessor-based systems. This efficient programming tool may operate with a controlling host PC or stand-alone. It is cross-platform, working on Linux, Windows, and macOS.To operate stand-alone, just set it up, then it can be controlled without the use of a PC program. It has a USB interface for configuration and control.Flasher Compact supports a wide range of CPU cores and an even wider range of different devices from various vendors. On this page, an overview of all supported CPU cores, as well as devices for which flash programming is supported, is given. The Flasher Compact comes with a built-in 20-pin connector, that can easily be adapted to any target interface.Further advantagesEach Flasher includes licenses to program with all supported MCUs and supports serial in target programming. It comes with free firmware updates.Package content Flasher Compact20-pin, 0.1" target ribbon cableUSB cable Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.For additional product information, please visit segger.com.

From €898.00*
Details
A blue device features a digital screen displaying programming progress at 68%. The screen shows file names, a date, and an address. Several buttons are located beneath the screen, labeled "Power," "Prog," and "Sel," suggesting functionality for device operation or navigation. A blue, handheld programming device labeled "Flasher Portable PLUS" with a small digital display shows a programming progress bar at 68%. The screen displays information about configuration files and memory addresses, along with buttons for power, programming, and selection.
Flasher Portable PLUS
Get Flasher Portable PLUS, a fast and reliable handheld in-system programming tool from the SEGGER Flasher family of programming tools for service teams maintaining embedded systems.Powered by a rechargeable Li-Ion battery, Flasher Portable PLUS doesn’t need an external power source. One battery charge supports up to 10 hours of programming. Operators can also enjoy full insights with a 1.8 inch display.Flasher Portable PLUS supports Authorized Flashing. This allows to limit the number of flash programming cycles and to protect the Flasher against non-authorized access in case of external production. The push button interface allows easy selection between multiple images/configurations stored on Flasher.Flasher Portable PLUS is built to program any on-chip or external flash memory in microcontroller- and micropocessor-based systems. This efficient programming tool may operate with a controlling host PC or stand-alone. It is cross-platform, working on Linux, Windows, and macOS.To operate stand-alone, just set it up, then it can be controlled without the use of a PC program. It has a USB interface for configuration and control.Further advantagesFlasher Portable PLUS supports a wide range of CPU cores and an even wider range of different devices from various vendors. On this page, an overview of all supported CPU cores, as well as devices for which flash programming is supported, is given. The Flasher Portable PLUS comes with a built-in 20-pin connector, that can easily be adapted to any target interface.Package content Flasher Portable PLUS 20-pin, 0.1" ribbon cable USB cable Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible. Please note: For customization options, please contact us.For additional product information, please visit segger.com.

From €998.00*
Details
This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the usability of this website, serve for direct advertising or simplify interaction with other websites and social networks, will only be used with your consent.