No results were found for the filter!
SiFive-ARTY Adapter
The SEGGER SiFive-ARTY Adapter allows debug connections between J-Link and the ARTY board running SiFive RISC-V core bitstreams. The ARTY board provides several identical headers where the JD header is used as the debug connector, when...
€49.00
*
50-Mil 10-Pin Patch Adapter
Adapts from the standard 20 pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector that is also used on many non-Cortex-M designs but with non-standard pinout. This adapter allows custom connections/wiring between the...
€49.00
*
Right Angle (RAFF) Adapter
The RAFF Adapter is a Right Angle Female to Female adapter. It is a 1:1 adapter and therefor does not change the pinout and can be used as a replacement of the standard IDC ribbon cable. A compact debug or programming solution can be...
€49.00
*
STDC 14 Adapter
Adapts from the 20-pin 0.1" J-Link / Flasher debug connector to a 14-pin 0.05'' connector as defined by ST. Additional Product Information on segger.com
€49.00
*
19-Pin Cortex-M Adapter
Adapts from .1" 20-pin Standard connector to .05" 19-pin Cortex-M connector incl. 19-pin cable Additional Product Information on segger.com
€32.00
*
9-Pin Cortex-M Adapter
Adapts from .1" 20-pin Standard connector to .05" 9-pin Cortex-M connector incl. 9-pin cable Additional Product Information on segger.com
€32.00
*
Arduino MKR Adapter
Adapter to connect a J-Link EDU mini with 0.05"-pitch connector with cable or regular J-Link with standard 20-pin header with an Arduino board of the MKR series. Additional Product Information on segger.com
€32.00
*
Viewed