No results were found for the filter!
The J-Link Signal Smoothing Adapter can be inserted between the J-Link debug probe and the debug target to overcome signal integrity issues. Additional Product Information on segger.com
€49.00
*
The Intel FPGA Adapter (formerly J-Link Altera Adapter) connects to the 10-pin Intel FPGA JTAG connector providing debug access to FPGA based MCU cores like the dual-core ARM Cortex-A9 in the Cyclone V devices. Incl. 10 pin ribbon cable...
€49.00
*
Adapts from the standard J-Link 20-pin 0.1" target connector to Xilinx 14 pin 2 mm connector (comp. Platform Cable USB II). Incl. 14 pin 1 mm ribbon cable Additional Product Information on segger.com
€49.00
*
Adapts from the standard J-Link 20-pin 0.1" target connector to Renesas 14-pin E1 connector Additional Product Information on segger.com
€49.00
*
The SEGGER STM8 adapter is required to connect the Flasher ATE, Flasher PRO and Flasher Portable PLUS with STM8 target boards. The adapter enables connections via SWIM connector, and the 10-pin 0.1"-pitch connector. Additional Product...
€49.00
*
Adapts from J-Link .1" 20-pin connector to Microchip .1" 6-pin connector. Package includes: 20-pin to 6-pin adapter .1" 6-pin ribbon cable (21 cm) Additional Product Information on segger.com
€49.00
*
The SEGGER SiFive-ARTY Adapter allows debug connections between J-Link and the ARTY board running SiFive RISC-V core bitstreams. The ARTY board provides several identical headers where the JD header is used as the debug connector, when...
€49.00
*
Adapts from the standard 20 pin 0.1" J-Link connector to the 6-pin 0.1" AVR SPI connector, 6-pin 0.05‘‘ AVR SPI connector or 10-pin 0.1‘‘ AVR SPI connector. Additionally a 5V or 3.3V power supply for the target is integrated. Additional...
€49.00
*
Adapts from the standard 20 pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector that is also used on many non-Cortex-M designs but with non-standard pinout. This adapter allows custom connections/wiring between the...
€49.00
*
The SEGGER RAFF Adapter is a Right Angle Female to Female adapter. It is a 1:1 adapter and therefor does not change the pinout and can be used as a replacement of the standard IDC ribbon cable. A compact debug or programming solution can...
€49.00
*
The SEGGER Infineon AUTO-20 Adapter allows a JTAG connection to a target hardware system, which has an Automotive Connector. It adapts from the 20-pin 0.1'' JTAG connector to a 19-pin 0.05'' Samtec FTSH connector. The SEGGER Infineon...
€49.00
*
NEW
The Infineon Aurix DAP-10 Adapter allows an OCDS DAP connection to a target hardware system that has a DAP connector. It adapts from the SEGGER 20-pin target interface connector to a 10-pin 0.05'' Samtec FTSH (e.g. FTSH-105-01-L-DV-K)...
€49.00
*
Viewed