Products from SEGGER
No results were found for the filter!
RX Fine Adapter
Adapts from 20-pin, 0.1‘‘ standard J-Link connector to 14-pin, 0.1" RX FINE connector. Incl. 14-pin cable. Additional Product Information on segger.com
€49.00
*
2mm Adapter
Adapts from 20-pin, 0.1‘‘ standard J-Link connector to 20-pin, 2mm connector. Additional Product Information on segger.com
€49.00
*
Signal Smoothing Adapter
The J-Link Signal Smoothing Adapter can be inserted between the J-Link debug probe and the debug target to overcome signal integrity issues. Additional Product Information on segger.com
€49.00
*
Intel FPGA Adapter
The Intel FPGA Adapter (formerly J-Link Altera Adapter) connects to the 10-pin Intel FPGA JTAG connector providing debug access to FPGA based MCU cores like the dual-core ARM Cortex-A9 in the Cyclone V devices. Incl. 10 pin ribbon cable...
€49.00
*
Xilinx Adapter
Adapts from the standard J-Link 20-pin 0.1" target connector to Xilinx 14 pin 2 mm connector (comp. Platform Cable USB II). Incl. 14 pin 1 mm ribbon cable Additional Product Information on segger.com
€49.00
*
RL78 Adapter
Adapts from the standard J-Link 20-pin 0.1" target connector to Renesas 14-pin E1 connector Additional Product Information on segger.com
€49.00
*
STM8 Adapter
The SEGGER STM8 adapter is required to connect the Flasher ATE, Flasher PRO and Flasher Portable PLUS with STM8 target boards. The adapter enables connections via SWIM connector, and the 10-pin 0.1"-pitch connector. Additional Product...
€49.00
*
Microchip 2-Wire JTAG TDI Adapter
Adapts from J-Link .1" 20-pin connector to Microchip .1" 6-pin connector. Package includes: 20-pin to 6-pin adapter .1" 6-pin ribbon cable (21 cm) Additional Product Information on segger.com
€49.00
*
SiFive-ARTY Adapter
The SEGGER SiFive-ARTY Adapter allows debug connections between J-Link and the ARTY board running SiFive RISC-V core bitstreams. The ARTY board provides several identical headers where the JD header is used as the debug connector, when...
€49.00
*
AVR SPI Adapter
Adapts from the standard 20 pin 0.1" J-Link connector to the 6-pin 0.1" AVR SPI connector, 6-pin 0.05‘‘ AVR SPI connector or 10-pin 0.1‘‘ AVR SPI connector. Additionally a 5V or 3.3V power supply for the target is integrated. Additional...
€49.00
*
50-Mil 10-Pin Patch Adapter
Adapts from the standard 20 pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector that is also used on many non-Cortex-M designs but with non-standard pinout. This adapter allows custom connections/wiring between the...
€49.00
*
emPower-USB-Host
Get emPower-USB-Host , a low-cost evaluation board for embedded applications. With a simple design, it supports SEGGER’s software such as the emUSB-Host, the emLoad bootloader and the real-time operating system (RTOS), embOS – all...
€49.00
*
Viewed