Skip to main content Skip to search Skip to main navigation

Menu

Description

Product information "Measurement+Patch Adapter"

Adapter for non-standard J-Link <-> Target connection including 10 jumper wires for manual setup


For additional product information, please visit segger.com.

Skip product gallery

Similar products

Image of a SEGGER Flying Wire Adapter, a small green printed circuit board with a connector at the top. The board features labeled pins for various functions, including GND, VREF, and TCK/SWDO. This adapter is used for programming and debugging embedded systems.
Flying Wire Adapter

Adapts from the standard 20 pin 0.1" J-Link connector to a 10-pin row, allowing to connect J-Link to target PCBs via flying wires.Especially useful when hooking up prototype HW where no final connector is decided yet. Or for manually connecting a J-Link to ST Discovery boards.For additional product information, please visit segger.com.

Regular price: €68.00
Image of a SEGGER 50-Mil 10-Pin Patch Adapter. The adapter is a small, rectangular green circuit board with a black connector on one end. It features labeled pins for connections, including RESET, GND, and TCK, providing interface capabilities for programming and debugging electronic devices.
50-Mil 10-Pin Patch Adapter

Adapts from the standard 20 pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector that is also used on many non-Cortex-M designs but with non-standard pinout. This adapter allows custom connections/wiring between the 20-pin and 10-pin side. For additional product information, please visit segger.com.

Regular price: €49.00