Get the J-Trace
PRO, the superspeed trace probe that is designed to support the advanced tracing features of all popular cores
and architectures. With its superspeed USB 3.0 interface, J-Trace PRO enables continuous streaming trace via USB with full trace clock. This lifts the limits from internal buffers, slowing data transmission to provide the insights a developer needs to optimize code.
With J-Trace PRO, complete traces can be captured over long periods. This enables the recording of infrequent,
hard-to-reproduce bugs. It is particularly helpful when the program flow ‘runs off the rails’ and stops in a fault
state. SuperSpeed USB 3.0 driven debug probe supporting unlimited streaming trace for Cortex-M, Cortex-R, Cortex-A, and RISC-V devices, 64 MB on-board trace buffer
Up to 4.0 MB/s download speedThe J-Trace PRO software package includes:
J-Flash / J-Flash SPI
J-Link Unlimited Flash Breakpoints
Ozone - The J-Link Debugger
Monitor mode
J-Link ARM RDI / RDDI
Package content
Cortex-M Trace Reference Board
.05" 20-pin debug & trace cable
.1" 20-pin ribbon cable (18 cm)
USB 3.0 cable
Micro USB cable
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.For additional product
information, pleace visit segger.com.
Get the J-Trace PRO Cortex, the superspeed trace probe that provides support
for Cortex-A/R/M-based microcontrollers. With its superspeed USB 3.0 interface, J-Trace PRO Cortex enables
continuous streaming trace via USB with full trace clock. This lifts the limits from internal buffers, slowing data
transmission to provide the insights a developer needs to optimize code.With J-Trace PRO, complete traces can
be captured over long periods. This enables the recording of infrequent, hard-to-reproduce bugs. It is particularly
helpful when the program flow ‘runs off the rails’ and stops in a fault state. SuperSpeed USB 3.0
driven debug probe supporting unlimited streaming trace for RISC-V devices, 64 MB on-board trace buffer. Up to 4.0 MB/s download
speed
Includes:
Streaming trace probe with USB Superspeed interface
Real-time streaming at full system clock
Tune your application with live profiling
Satisfy regulatory requirements with instruction-level code coverage
Isolate and Identify hard-to-find code defects with unlimited trace
Supports streaming trace
Supports Cortex-A/R/M targets
Full J-Link debug functionality
Further advantagesIt also supports extended trace features, such as code
coverage (so engineers have visibility over which parts of the application code have been executed) and execution
profiling (providing visibility as to which instructions have been executed and how often—so hotspots can be
addressed and optimization opportunities identified).Package content
J-Trace PRO trace probe
Cortex-M Trace Reference Board
.05" 20-pin debug & trace cable
.1" 20-pin ribbon cable (18 cm)
USB 3.0 cable
Mini USB cable
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.
For additional
product information, please visit segger.com.
Get the J-Trace PRO RISC-V, the superspeed trace probe that provides support
for RISC-V-based microcontrollers. With its superspeed USB 3.0 interface, J-Trace PRO RISC-V enables
continuous streaming trace via USB with full trace clock. This lifts the limits from internal buffers, slowing data
transmission to provide the insights a developer needs to optimize code.With J-Trace PRO, complete traces can
be captured over long periods. This enables the recording of infrequent, hard-to-reproduce bugs. It is particularly
helpful when the program flow ‘runs off the rails’ and stops in a fault state. SuperSpeed USB 3.0
driven debug probe supporting unlimited streaming trace for RISC-V devices, 64 MB on-board trace buffer. TestUp to 4.0 MB/s
download speedIncludes:
J-Flash / J-Flash SPI
J-Link Unlimited Flash Breakpoints
Ozone - The J-Link Debugger
Monitor mode
Further advantagesIt also supports extended trace features, such as code
coverage (so engineers have visibility over which parts of the application code have been executed) and execution
profiling (providing visibility as to which instructions have been executed and how often—so hotspots can be
addressed and optimization opportunities identified).
Package content
J-Trace PRO trace probe
.05" 20-pin debug & trace cable
.1" 20-pin ribbon cable (18 cm)
USB 3.0 cable
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.For additional product information, please visit segger.com.
Get theJ-Trace
PRO for Cortex-M, the leading trace probe that is setting a new standard for trace probes. Thanks to its
advanced capabilities, it enables continuous streaming trace and lifts the limitations by internal buffers, slowing
data transmission to provide those valuable insights that let developer optimize code.J-Trace PRO captures
complete trace over long periods, allowing the recording of bugs that are infrequent and hard to reproduce. This is
especially helpful when the program flow “runs off the rails” and stops in a fault state.Up to 4.0 MB/s download speed
Further advantagesThe
J-Trace PRO Cortex-M supports extended trace features: Code coverage (visibility over which parts of the code have
been executed) and execution profiling (visibility as to which instructions have been executed & how often).
Package content
J-Trace PRO trace probe
Cortex-M Trace Reference Board
.05" 20-pin debug & trace cable
1" 20-pin ribbon cable (18 cm)
Mini USB cable
USB 3.0 cable
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.
For additional
product information, please visit segger.com.
iMX RT1050 Trace Reference Board
iMX RT1050
ARM Cortex-M7
External debug header with trace pins
Test points for trace signals
The SEGGER
iMX RT1050 Trace Reference Board is a simple hardware with an ARM Cortex-M7 based microcontroller supporting the
Embedded Trace Macrocell (ETM). Its prime purpose is to quickly set up a reference project for instruction tracing
and live code coverage and profiling.For additional product information, please visit segger.com.
STM32H7 Trace Reference Board
STM32H7
ARM Cortex-M7
External debug header with trace pins
Test points for trace signals
The SEGGER STM32H7 Trace Reference Board is a simple hardware with an ARM Cortex-M7 based microcontroller supporting the Embedded Trace Macrocell (ETM). Its primary purpose is to quickly set up a reference project for instruction tracing
and live code coverage and profiling.For additional product information, please visit segger.com.
Adapts from 20-pin .05" Cortex trace connector to 38 pin Mictor
connector.The pin out follows the single target connector
pinout specification as defined in the ARM "ETM Architecture Specification".For additional product information, please visit segger.com.
The SiFive-ARTY Trace Adapter allows debug and trace
connections between the J-Trace PRO and the ARTY board running SiFive RISC-V core bitstreams.The ARTY
board provides several identical headers where the JD header is used as the debug connector and JC header as the
trace connector, when running SiFive RISC-V bitstreams on the ARTY board that have trace enabled.For additional product information, please visit segger.com.
The MIPI-60 Adapter allows JTAG connections between J-Link, J-Trace or
Flasher and Jacinto7 TI target hardware systems. It provides a 19-pin JTAG/SWD and Trace connector, which allows
TPIU tracing with up to 4 pins, and an Arm Standard 20-pin connector.For additional product information, please visit segger.com.
Cortex-M Trace Reference Board
ST STM32F407VE
ARM Cortex-M4F
External debug header with trace pins
Test points for trace signals
The SEGGER Cortex-M Trace Reference Board is a simple hardware
with an ARM Cortex-M4F based microcontroller supporting the Embedded Trace Macrocell (ETM). Its prime purpose is
to quickly set up a reference project for instruction tracing and live code coverage and profiling.For additional product information, please visit segger.com.
This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the usability of this website, serve for direct advertising or simplify interaction with other websites and social networks, will only be used with your consent.