USB Isolator
€164.00
Available, delivery time: 1-2 days
Product information
J-Link USB connector to provide host side electrical isolation.
For additional product information, please visit segger.com.
Suitable accessories
emPower Boards (3)
Get emPower, the Software Evaluation Board from SEGGER, helping developers to accelerate the start of any project. This evaluation board supports SEGGER’s real-time operating system (RTOS), embOS. Other supported software components include the emWeb web server and SEGGER’s emWin graphics library. emPower has a 1.8" LCD module (resolution 160x128) and a display adapter connector (5 V/3.3 V, SPI, PWM for backlight control). It also includes a high-speed B-type USB connector and a full speed USB host.Other detailsemPower comes with J-Link OB, an on-board version of SEGGER’s market-leading debug probe, J-Link. A full overview of specifications can be found in the emPower data sheet. Package Content emPower Eval Board Display Add-on Micro USB cable For additional product information, please visit segger.com.
Get the emPower Zynq Evaluation Board from SEGGER, helping developers evaluate software.emPower Zynq supports SEGGER’s integrated development environment (IDE), real-time operating system (RTOS), embOS. Also supported is emCompress, emCrypt, emFile, emModbus and emNet. A full list of included features can be found here.Other detailsThe emPower Zynq Evaluation Board from SEGGER includes 1Gbps Ethernet, an SD Card interface and an external debug interface (19-pin Cortex-M) including trace. There is support for Xilinx USB platform cable. emPower Zynq also comes with J-Link OB, the evaluation version of SEGGER’s J-Link debug probe. Package content emPower Zynq Eval Board 2 x micro USB cable For additional product information, please visit segger.com.
Get emPower-USB-Host+, a low-cost evaluation board for embedded applications. With a simple design, it supports SEGGER’s software such as the emUSB-Host, the emLoad bootloader and the real-time operating system (RTOS), embOS – all ready-to-run.Developers can easily update the emPower USB-Host+ Board’s firmware by storing the binary of self-written software on a USB memory stick. This comes ready-to-run.There is a collection of samples for the emPower USB-Host+ Board available. These can be seen on the emUSB-Host samples page. Developers can use this hardware as a blueprint for their own devices using two USB-Host ports. The schematics of the board are available for that purpose. To access the board via debug probe, it is equipped with a J-Link OB. Other detailsemPower-USB-Host+ Board is connected by a micro USB connector to a USB port or charger. The emLoad bootloader will then program the image onto the board. Each demo pack comes with firmware images ready to be programmed into the board. It can also be debugged by Embedded Studio and the J-Link OB. Package content emPower USB-Host+ Board Micro USB cable For additional product information, please visit segger.com.
USB (1)
Get emPower-USB-Host+, a low-cost evaluation board for embedded applications. With a simple design, it supports SEGGER’s software such as the emUSB-Host, the emLoad bootloader and the real-time operating system (RTOS), embOS – all ready-to-run.Developers can easily update the emPower USB-Host+ Board’s firmware by storing the binary of self-written software on a USB memory stick. This comes ready-to-run.There is a collection of samples for the emPower USB-Host+ Board available. These can be seen on the emUSB-Host samples page. Developers can use this hardware as a blueprint for their own devices using two USB-Host ports. The schematics of the board are available for that purpose. To access the board via debug probe, it is equipped with a J-Link OB. Other detailsemPower-USB-Host+ Board is connected by a micro USB connector to a USB port or charger. The emLoad bootloader will then program the image onto the board. Each demo pack comes with firmware images ready to be programmed into the board. It can also be debugged by Embedded Studio and the J-Link OB. Package content emPower USB-Host+ Board Micro USB cable For additional product information, please visit segger.com.
Similar products
The RAFF Adapter is a Right Angle Female to Female adapter. It is a 1:1 adapter and therefor does not change the pinout and can be used as a replacement of the standard IDC ribbon cable. A compact debug or programming solution can be achieved with a J-Link Compact or Flasher Compact and the RAFF adapter plugged into a straight/vertical PCB pin header on the target application board.For additional product information, please visit segger.com.
The SWD Isolator Box is inserted into the connection of a J-Link or Flasher and a target board to provide electrical isolation. This is essential when the development or production tools are not connected to the same ground as the application. The SWD Isolator uses high speed digital isolators that allow a very low propagation time between input and output.For more information please visit the SWD Isolator information page at www.segger.com
The JTAG Isolator Box is inserted into the connection of a J-Link or Flasher and a target board to provide electrical isolation. This is essential when the development or production tools are not connected to the same ground as the application. The JTAG Isolator uses high speed digital isolators that allow a very low propagation time between input and output.For more information please visit the JTAG Isolator information page at www.segger.com
Standard .05" 19-pin Cortex-M connector to provide electrical isolation.For additional product information, please visit segger.com.