Go to homepage
€0.00
Menu

Filter

Filter products

47 Products
Image of a SEGGER Flying Wire Adapter, a small green printed circuit board with a connector at the top. The board features labeled pins for various functions, including GND, VREF, and TCK/SWDO. This adapter is used for programming and debugging embedded systems.
Flying Wire Adapter

Adapts from the standard 20 pin 0.1" J-Link connector to a 10-pin row, allowing to connect J-Link to target PCBs via flying wires.Especially useful when hooking up prototype HW where no final connector is decided yet. Or for manually connecting a J-Link to ST Discovery boards.For additional product information, please visit segger.com.

€68.00
Details
Image of an ARM14-pin adapter, featuring a green top section with pins and the brand logo. It connects to a flat ribbon cable on one side, transitioning to a connector on the other side. The adapter is used for electronic and programming applications.
ARM-14 Adapter

Adapter for Arm targets with 14-pin JTAG connector.Incl. 14-pin ribbon cableFor additional product information, please visit segger.com.

€68.00
Details
Image of a ribbon cable connector featuring a green circuit board on one side with metal pins and a flat, gray ribbon cable extending from the opposite side. The design is typical for electronic connections, used for data transfer between devices.
14-Pin TI Adapter

Adapts from .1" 20-pin Standard connector to 14-pin TI connector incl. 14-pin cableFor additional product information, please visit segger.com.

€49.00
Details
An image of a cable with two connectors, one side featuring a green circuit board labeled "J-LINK PPC-14" from SEGGER, and the other side showing a gray ribbon connector. The cable is designed for programming and debugging electronic devices.
PPC 14-Pin Adapter

Adapts from 20-pin, 0.1 inch Standard connector to 14-pin, PPC connector incl. 14-pin cableAdditional Product Information on segger.com

€49.00
Details
Image of a J-Link Microchip Adapter. The adapter features a green circuit board with pins and markings, connected to a gray cable ending in a small rectangular connector. It is used for programming or debugging microcontrollers.
Microchip LVP Adapter

Adapts from the standard J-Link 20-pin 0.1" target connector to Microchip RJ11 modular debug connector. Incl. 6-pin RJ11 modular connector cable.For additional product information, please visit segger.com.

€49.00
Details
A J-Link RX-FINE interface adapter with two connectors attached to a ribbon cable. The left connector is green with pin configurations, and the right connector is gray with a locking mechanism. The image highlights the adapter's design for connecting debugging equipment.
RX FINE Adapter

Adapts from 20-pin, 0.1‘‘ standard J-Link connector to 14-pin, 0.1" RX FINE connector. Incl. 14-pin cable.For additional product information, please visit segger.com.

€49.00
Details
An electronic J-Link 2mm adapter is displayed against a plain background. The adapter features a green printed circuit board with multiple metal pins on one end and a connector on the opposite end, labeled for identification.
2mm Adapter

Adapts from 20-pin, 0.1‘‘ standard J-Link connector to 20-pin, 2mm connector.For additional product information, please visit segger.com.

€49.00
Details
Image of a J-Link Signal Smoothing Adapter, which is a small green circuit board with metal connectors on each side. It features printed text indicating its name and a website, with multiple pins visible for connectivity. The board is placed on a plain white background.
Signal Smoothing Adapter

The J-Link Signal Smoothing Adapter can be inserted between the J-Link debug probe and the debug target to overcome signal integrity issues.For additional product information, please visit segger.com.

€49.00
Details
An Intel FPGA adapter is shown, featuring a green circuit board with multiple pins on one end and a flat ribbon cable on the other. The adapter is designed for connecting to FPGA devices and includes a manufacturer's logo and website link.
Intel FPGA Adapter

The Intel FPGA Adapter (formerly J-Link Altera Adapter) connects to the 10-pin Intel FPGA JTAG connector providing debug access to FPGA based MCU cores like the dual-core ARM Cortex-A9 in the Cyclone V devices.Incl. 10 pin ribbon cableFor additional product information, please visit segger.com.

€49.00
Details
An electronic adapter labeled "J-Link SiLabs C2 Adapter" connects two ribbon cables. One end features a printed green circuit board with pins, while the other end has a connector housing. The image showcases the adapter's design and functional connections.
SiLabs C2 Adapter

Adapts from 20-pin, 0.1 inch J-Link connector to 10-pin, 0.1 inch SiLabs 8051 C2 connector.Incl. 10-pin cable.For additional product information, please visit segger.com.

€49.00
Details
The image features a J-Link Xilinx adapter, a small, green circuit board with pins for connection on one end and a flat ribbon cable extending from the other. The adapter is used for programming and debugging in electronics projects.
Xilinx Adapter

Adapts from the standard J-Link 20-pin 0.1" target connector to Xilinx 14 pin 2 mm connector (comp. Platform Cable USB II).Incl. 14 pin 1 mm ribbon cableFor additional product information, please visit segger.com.

€49.00
Details
Image of a small green circuit board featuring connectors and labels. It is identified as a "J-Link Microchip 2-Wire JTAG TDI Adapter." The board includes a series of gold pins, with numbers indicating connection points. A website link is printed on the surface.
Microchip 2-Wire JTAG TDI Adapter

Adapts from J-Link .1" 20-pin connector to Microchip .1" 6-pin connector.Package content 20-pin to 6-pin adapter .1" 6-pin ribbon cable (21 cm) For additional product information, please visit segger.com.

€49.00
Details
Image features a SEGGER SIFive-ARTY programming adapter. The adapter has a green circuit board with multiple gold pins at the top and a black connector at the bottom, designed for interfacing with development boards. It is shown from a frontal view against a plain background.
SiFive-ARTY Adapter

The SEGGER SiFive-ARTY Adapter allows debug connections between J-Link and the ARTY board running SiFive RISC-V core bitstreams. The ARTY board provides several identical headers where the JD header is used as the debug connector, when running SiFive RISC-V bitstreams on the ARTY board.For additional product information, please visit segger.com.

€49.00
Details
Image of a SEGGER 50-Mil 10-Pin Patch Adapter. The adapter is a small, rectangular green circuit board with a black connector on one end. It features labeled pins for connections, including RESET, GND, and TCK, providing interface capabilities for programming and debugging electronic devices.
50-Mil 10-Pin Patch Adapter

Adapts from the standard 20 pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector that is also used on many non-Cortex-M designs but with non-standard pinout. This adapter allows custom connections/wiring between the 20-pin and 10-pin side. For additional product information, please visit segger.com.

€49.00
Details
Image of a SEGGER RAFF Adapter. It features a small green circuit board with two black connectors on opposite sides, including a series of metal pins in the center. The words "SEGGER RAFF Adapter" are printed on the green background. Image shows a small electronic adapter board with multiple pin connections on one side labeled "SEGGER J-Link Adapter." The board is primarily dark with green edges, designed for interfacing with other electronic components.
Right Angle (RAFF) Adapter

The RAFF Adapter is a Right Angle Female to Female adapter. It is a 1:1 adapter and therefor does not change the pinout and can be used as a replacement of the standard IDC ribbon cable. A compact debug or programming solution can be achieved with a J-Link Compact or Flasher Compact and the RAFF adapter plugged into a straight/vertical PCB pin header on the target application board.For additional product information, please visit segger.com.

€49.00
Details
The image features a green circuit board adapter labeled "STDC14 Adapter," with several pins and switches, connected to a flat ribbon cable. The cable has multiple wires and ends in a connector, used for electronic component connections.
STDC 14 Adapter

Adapts from the 20-pin 0.1" J-Link / Flasher debug connector to a 14-pin 0.05'' connector as defined by ST.For additional product information, please visit segger.com.

€49.00
Details
Image depicts a small electronic device with a blue casing featuring indicator lights labeled "Ready," "Not Ready," and "Fail," along with a button labeled "PROG." Below, there is a black connector piece with an oval cutout, likely for attachment or interface purposes. A black, rectangular piece of rubber with a textured surface and a cylindrical opening at the center. The shape resembles a mounting bracket or fixture, commonly used in various mechanical applications.
Mounting brackets

Mounting brackets to securely fasten Flasher in-circuit programmers or J-Link Pro PoE debug probes during use. This solution ensures a stable and organized setup.

From €18.00
Details
A printed circuit board connector is shown on the left, featuring multiple metal pins. Attached to the connector is a flat ribbon cable, which leads to a smaller connector on the right. The background is plain white.
19-Pin Cortex-M Adapter

Adapts from .1" 20-pin Standard connector to .05" 19-pin Cortex-M connector incl. 19-pin cableFor additional product information, please visit segger.com.

€32.00
Details
Image shows a circuit board adapter with several rows of metal pins on one side, connected by a wire to a smaller connector. The adapter is designed for interfacing with electronic components.
9-Pin Cortex-M Adapter

Adapts from .1" 20-pin Standard connector to .05" 9-pin Cortex-M connector incl. 9-pin cableFor additional product information, please visit segger.com.

€32.00
Details
An electronic circuit adapter is displayed, featuring a green printed circuit board (PCB) with multiple pins. A white cable with colored wires connects to the adapter, indicating functionality for programming or debugging with a device. The overall layout suggests a compact and specialized component for technical use.
Arduino MKR Adapter

Adapter to connect a J-Link EDU mini with 0.05"-pitch connector with cable or regular J-Link with standard 20-pin header with an Arduino board of the MKR series.For additional product information, please visit segger.com.

€32.00
Details
A flat, flexible ribbon cable featuring multiple parallel wires, with connectors at each end. The cable is primarily gray with a blue stripe. It is commonly used to connect components in electronics, like computers and other devices.
.1" 20-pin ribbon cable (18 cm)

.1" 20-pin ribbon cable (18 cm)

€10.00
Details
A flat, gray ribbon cable bends in a "V" shape, featuring connectors at both ends. Red lines run along the edges, indicating its design for electronic connectivity. The cable is typically used to connect computer components.
.05" 20-pin ribbon cable (15 cm)

.05" 20-pin ribbon cable (15 cm)

€10.00
Details
Two gray ribbon cables are shown, each with a black connector on one end. The cables are flat, with a red stripe running along one side, indicating their orientation. They are commonly used for connecting internal components in computers.
.05" 10-pin ribbon cable (15 cm)

.05" 10-pin ribbon cable (15 cm)

€10.00
Details
This website uses cookies to ensure the best experience possible. More information...
Privacy policy | Imprint