SWD Isolator Box
€218.00
Available, delivery time: 1-2 days
Product information
The SWD Isolator Box is inserted into the connection of a J-Link or Flasher and a target board to provide electrical isolation. This is essential when the development or production tools are not connected to the same ground as the application. The SWD Isolator uses high speed digital isolators that allow a very low propagation time between input and output.
For more information please visit the SWD Isolator information page at www.segger.com
Similar products
The JTAG Isolator Box is inserted into the connection of a J-Link or Flasher and a target board to provide electrical isolation. This is essential when the development or production tools are not connected to the same ground as the application. The JTAG Isolator uses high speed digital isolators that allow a very low propagation time between input and output.For more information please visit the JTAG Isolator information page at www.segger.com
The RAFF Adapter is a Right Angle Female to Female adapter. It is a 1:1 adapter and therefor does not change the pinout and can be used as a replacement of the standard IDC ribbon cable. A compact debug or programming solution can be achieved with a J-Link Compact or Flasher Compact and the RAFF adapter plugged into a straight/vertical PCB pin header on the target application board.For additional product information, please visit segger.com.
J-Link USB connector to provide host side electrical isolation.For additional product information, please visit segger.com.