No results were found for the filter!
Microchip 2-Wire JTAG TDI Adapter
Adapts from J-Link .1" 20-pin connector to Microchip .1" 6-pin connector. Package includes: 20-pin to 6-pin adapter .1" 6-pin ribbon cable (21 cm) Additional Product Information on segger.com
The SEGGER SiFive-ARTY Adapter allows debug connections between J-Link and the ARTY board running SiFive RISC-V core bitstreams. The ARTY board provides several identical headers where the JD header is used as the debug connector, when...
50-Mil 10-Pin Patch Adapter
Adapts from the standard 20 pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector that is also used on many non-Cortex-M designs but with non-standard pinout. This adapter allows custom connections/wiring between the...
Right Angle (RAFF) Adapter
The RAFF Adapter is a Right Angle Female to Female adapter. It is a 1:1 adapter and therefor does not change the pinout and can be used as a replacement of the standard IDC ribbon cable. A compact debug or programming solution can be...
STDC 14 Adapter
Adapts from the 20-pin 0.1" J-Link / Flasher debug connector to a 14-pin 0.05'' connector as defined by ST. Additional Product Information on segger.com
19-Pin Cortex-M Adapter
Adapts from .1" 20-pin Standard connector to .05" 19-pin Cortex-M connector incl. 19-pin cable Additional Product Information on segger.com
9-Pin Cortex-M Adapter
Adapts from .1" 20-pin Standard connector to .05" 9-pin Cortex-M connector incl. 9-pin cable Additional Product Information on segger.com
Arduino MKR Adapter
Adapter to connect a J-Link EDU mini with 0.05"-pitch connector with cable or regular J-Link with standard 20-pin header with an Arduino board of the MKR series. Additional Product Information on segger.com
Cortex-M Trace Reference Board
Cortex-M Trace Reference Board ST STM32F407VE ARM Cortex-M4F External debug header with trace pins Test points for trace signals The SEGGER Cortex-M Trace Reference Board is a simple hardware with an ARM Cortex-M4F based microcontroller,...