No results were found for the filter!
RL78 Adapter
Adapts from the standard J-Link 20-pin 0.1" target connector to Renesas 14-pin E1 connector Additional Product Information on segger.com
€49.00
*
STM8 Adapter
The SEGGER STM8 adapter is required to connect the Flasher ATE, Flasher PRO and Flasher Portable PLUS with STM8 target boards. The adapter enables connections via SWIM connector, and the 10-pin 0.1"-pitch connector. Additional Product...
€49.00
*
Microchip 2-Wire JTAG TDI Adapter
Adapts from J-Link .1" 20-pin connector to Microchip .1" 6-pin connector. Package includes: 20-pin to 6-pin adapter .1" 6-pin ribbon cable (21 cm) Additional Product Information on segger.com
€49.00
*
SiFive-ARTY Adapter
The SEGGER SiFive-ARTY Adapter allows debug connections between J-Link and the ARTY board running SiFive RISC-V core bitstreams. The ARTY board provides several identical headers where the JD header is used as the debug connector, when...
€49.00
*
AVR SPI Adapter
Adapts from the standard 20 pin 0.1" J-Link connector to the 6-pin 0.1" AVR SPI connector, 6-pin 0.05‘‘ AVR SPI connector or 10-pin 0.1‘‘ AVR SPI connector. Additionally a 5V or 3.3V power supply for the target is integrated. Additional...
€49.00
*
50-Mil 10-Pin Patch Adapter
Adapts from the standard 20 pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector that is also used on many non-Cortex-M designs but with non-standard pinout. This adapter allows custom connections/wiring between the...
€49.00
*
Right Angle (RAFF) Adapter
The RAFF Adapter is a Right Angle Female to Female adapter. It is a 1:1 adapter and therefor does not change the pinout and can be used as a replacement of the standard IDC ribbon cable. A compact debug or programming solution can be...
€49.00
*
Infineon AUTO-20 Adapter
The SEGGER Infineon AUTO-20 Adapter allows a JTAG connection to a target hardware system, which has an Automotive Connector. It adapts from the 20-pin 0.1'' JTAG connector to a 19-pin 0.05'' Samtec FTSH connector. The SEGGER Infineon...
€49.00
*
Infineon Aurix DAP-10 Adapter
The Infineon Aurix DAP-10 Adapter allows an OCDS DAP connection to a target hardware system that has a DAP connector. It adapts from the SEGGER 20-pin target interface connector to a 10-pin 0.05'' Samtec FTSH (e.g. FTSH-105-01-L-DV-K)...
€49.00
*
Renesas M16C Family 10-Pin Adapter
Adapts from the standard 20-pin connector of Flasher PRO to target hardware which uses a Renesas 10-pin programming connector. Additional Product Information on segger.com
€49.00
*
STDC 14 Adapter
Adapts from the 20-pin 0.1" J-Link / Flasher debug connector to a 14-pin 0.05'' connector as defined by ST. Additional Product Information on segger.com
€49.00
*
19-Pin Cortex-M Adapter
Adapts from .1" 20-pin Standard connector to .05" 19-pin Cortex-M connector incl. 19-pin cable Additional Product Information on segger.com
€32.00
*
Viewed