No results were found for the filter!
The RAFF Adapter is a Right Angle Female to Female adapter. It is a 1:1 adapter and therefor does not change the pinout and can be used as a replacement of the standard IDC ribbon cable. A compact debug or programming solution can be...
€49.00
*
The SEGGER Infineon AUTO-20 Adapter allows a JTAG connection to a target hardware system, which has an Automotive Connector. It adapts from the 20-pin 0.1'' JTAG connector to a 19-pin 0.05'' Samtec FTSH connector. The SEGGER Infineon...
€49.00
*
The Infineon Aurix DAP-10 Adapter allows an OCDS DAP connection to a target hardware system that has a DAP connector. It adapts from the SEGGER 20-pin target interface connector to a 10-pin 0.05'' Samtec FTSH (e.g. FTSH-105-01-L-DV-K)...
€49.00
*
Adapts from the standard 20-pin connector of Flasher PRO to target hardware which uses a Renesas 10-pin programming connector. Additional Product Information on segger.com
€49.00
*
Adapts from the 20-pin 0.1" J-Link / Flasher debug connector to a 14-pin 0.05'' connector as defined by ST. Additional Product Information on segger.com
€49.00
*
Adapts from .1" 20-pin Standard connector to .05" 19-pin Cortex-M connector incl. 19-pin cable Additional Product Information on segger.com
€32.00
*
Adapts from .1" 20-pin Standard connector to .05" 9-pin Cortex-M connector incl. 9-pin cable Additional Product Information on segger.com
€32.00
*
Viewed