SEGGER Flasher Compact

Product information "Flasher Compact"

Get Flasher Compact, the compact version of the Flasher PRO for easier integration into size limited production setups. Thanks to its compact form factor, Flasher Compact allows for easy integration into size-constrained project setups. In combination with the Flasher Hub-4 or Flasher Hub-12 the Flasher Compact is a powerful gang programming solution.

Flasher Compact is built to program any on-chip or external flash memory in microcontroller- and micropocessor-based systems. This efficient programming tool may operate with a controlling host PC or stand-alone. It is cross-platform, working on Linux, Windows, and macOS.
To operate stand-alone, just set it up, then it can be controlled without the use of a PC program. It has a USB interface for configuration and control.
Flasher Compact supports a wide range of CPU cores and an even wider range of different devices from various vendors. On this page, an overview of all supported CPU cores, as well as devices for which flash programming is supported, is given. The Flasher Compact comes with a built-in 20-pin connector, that can easily be adapted to any target interface.

Further advantages
Each Flasher includes licenses to program with all supported MCUs and supports serial in target programming. It comes with free firmware updates.

Package content

Flasher Compact
20-pin, 0.1" target ribbon cable
USB cable

Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.

For additional product information, please visit segger.com.

Host Interface:	USB
Programming Trigger:	Button, Flasher Hub, J-Flash
Supported Targets:	ARM Cortex Cores, ARM legacy Cores, Microchip AVR, Microchip AVR32, Microchip PIC16, Microchip PIC32, NXP/ST PowerPC, RISC-V , Renesas M16, Renesas M32, Renesas RL78, Renesas RX, STM8, SiLabs 8051, TI MSP430
Target Interface:	(Q)SPI, 8051 C2, FINE, ICSP, IIC, ISP, JTAG, PDI, SPD, SWD, SWIM, UART, UPDI, cJTAG

Similar products

Flasher PRO XL

Get the Flasher PRO XL, the the storage extended version of Flasher PRO. It provides 2GB of on-board storage for programming large images and configurations.Flasher PRO XL is a fast and reliable in-system programming tool for embedded systems from the SEGGER Flasher family of programming tools. Flasher PRO XL is built to program any on-chip or external flash memory in microcontroller- and micropocessor-based systems. This efficient programming tool may operate with a controlling host PC or stand-alone. It is cross-platform, working on Linux, Windows, and macOS. To operate stand-alone, just set it up, then it can be controlled without the use of a PC program. It has an Ethernet, USB and RS232 interface for configuration and control.Flasher PRO XL supports a wide range of CPU cores and an even wider range of different devices from various vendors. On this page, an overview of all supported CPU cores, as well as devices for which flash programming is supported, is given. The Flasher PRO XL comes with a built-in 20-pin connector, that can easily be adapted to any target interface.Further advantagesEach Flasher includes licenses to program with all supported MCUs and supports serial in target programming. It comes with free firmware updates.Package content Flasher PRO XL 20-pin, 0.1" target ribbon cable RS232 cable 1:1 female / male USB cable Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible. For additional product information, please visit segger.com.

From €1,198.00*

Details

Flasher PRO

Get Flasher PRO, a fast and reliable in-system programming tool for embedded systems from the SEGGER Flasher family of programming tools.Flasher PRO is built to program any on-chip or external flash memory in microcontroller- and micropocessor-based systems. This efficient programming tool may operate with a controlling host PC or stand-alone. It is cross-platform, working on Linux, Windows, and macOS.To operate stand-alone, just set it up, then it can be controlled without the use of a PC program. It has an Ethernet, USB and RS232 interface for configuration and control.Flasher PRO supports a wide range of CPU cores and an even wider range of different devices from various vendors. On this page, an overview of all supported CPU cores, as well as devices for which flash programming is supported, is given. The Flasher PRO comes with a built-in 20-pin connector, that can easily be adapted to any target interface.Further advantagesEach Flasher includes licenses to program with all supported MCUs and supports serial in target programming. It comes with free firmware updates.Package content Flasher PRO20-pin, 0.1" ribbon cableRS232 cable 1:1 female / maleUSB cable Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible. For additional product information, please visit segger.com.

From €998.00*

Details

A blue device features a digital screen displaying programming progress at 68%. The screen shows file names, a date, and an address. Several buttons are located beneath the screen, labeled "Power," "Prog," and "Sel," suggesting functionality for device operation or navigation.

Flasher Portable PLUS

Get Flasher Portable PLUS, a fast and reliable handheld in-system programming tool from the SEGGER Flasher family of programming tools for service teams maintaining embedded systems.Powered by a rechargeable Li-Ion battery, Flasher Portable PLUS doesn’t need an external power source. One battery charge supports up to 10 hours of programming. Operators can also enjoy full insights with a 1.8 inch display.Flasher Portable PLUS supports Authorized Flashing. This allows to limit the number of flash programming cycles and to protect the Flasher against non-authorized access in case of external production. The push button interface allows easy selection between multiple images/configurations stored on Flasher.Flasher Portable PLUS is built to program any on-chip or external flash memory in microcontroller- and micropocessor-based systems. This efficient programming tool may operate with a controlling host PC or stand-alone. It is cross-platform, working on Linux, Windows, and macOS.To operate stand-alone, just set it up, then it can be controlled without the use of a PC program. It has a USB interface for configuration and control.Further advantagesFlasher Portable PLUS supports a wide range of CPU cores and an even wider range of different devices from various vendors. On this page, an overview of all supported CPU cores, as well as devices for which flash programming is supported, is given. The Flasher Portable PLUS comes with a built-in 20-pin connector, that can easily be adapted to any target interface.Package content Flasher Portable PLUS 20-pin, 0.1" ribbon cable USB cable Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible. Please note: For customization options, please contact us.For additional product information, please visit segger.com.

From €998.00*

Details

A blue and gray device labeled "Flasher" serves as an in-circuit programmer for ARM systems. It features buttons labeled "PROG" and indicators for "Ready," "Not ready," and "Fail." The design is compact and intended for electronic programming tasks.

Flasher ARM

Get Flasher ARM, part of the Flasher family of reliable, high-speed production programmers from SEGGER. Flasher ARM is an in-system programming tool designed for Arm core-based microcontrollers with on-chip and/or external flash memory. Once set up, it can be used as a stand-alone programmer, without the need of a PC program. Cross-platform, it works on Linux, Windows, and macOS.Flasher ARM supports serial target programming, has an Ethernet interface and 128 MB memory for the storage of the target program. This Flasher supports a wide range of internal and external flash devices. If additional targets are required, consider using the Flasher PRO.Further advantagesFlasher ARM supports Authorized Flashing, letting users limit the number of flash programming cycle. This protects the Flasher against non-authorized access in the case of external production. Flasher ARM supports a wide range of CPU cores and an even wider range of different devices from various vendors. Find an overview of all supported CPU cores here and devices here.Package content Flasher ARM20-pin, 0.1" target ribbon cableRS232 cable 1:1 female / maleUSB cable Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible. For additional product information, please visit segger.com.

From €798.00*

Details

Flasher Compact

Suitable accessories

Flasher

Software add-ons

Adapters

Isolators

Accessories

Product information "Flasher Compact"