Products from SEGGER
No results were found for the filter!
SEGGER (Q)SPI Flash Evaluator Adapter board Pack for BGA
10 Adapter Boards for BGA 4x6mm and 5x5mm (blank PCB board) Additional Product Information on segger.com
€118.00
*
SEGGER (Q)SPI Flash Evaluator Adapter board Pack for SON/DFN
10 Adapter Boards for SON/DFN 8×6, 6×5, 4×4, 3×4, 3×2 (blank PCB board) Additional Product Information on segger.com
€118.00
*
Linux Studio – extension
Get the extension license for Linux Studio – the professional, integrated development environment (IDE) from SEGGER. Linux Studio provides developers with all the features and power of SEGGER’s Embedded Studio making it available to...
€99.60
*
10-pin Needle Adapter
Adapts from 20-pin, 0.1 inch Standard connector to 10-pin, 0.05 inch TAG-Connect needle pattern Additional Product Information on segger.com
€98.00
*
RX Adapter
Adapts from .1" 20-pin Standard connector to 14-pin RX600 JTAG connector incl. .1" 14-pin cable Additional Product Information on segger.com
€98.00
*
Measurement+Patch Adapter
Adapter for non-standard J-Link Target connection including 10 jumper wires for manual setup Additional Product Information on segger.com
€98.00
*
6-pin Needle Adapter
Adapts from 20-pin, 0.1 inch J-Link connector to 6-pin, 0.05 inch needle pattern. Incl. 6-pin cable with legs. Additional Product Information on segger.com
€98.00
*
5V Target Supply Adapter
The J-Link Target Supply Adapter provides a default voltage of 5 V to power the target using pin 19. The voltage can be adjusted by replacing resistors. Additional Product Information on segger.com
€98.00
*
Programming Voltage Adapter
The SEGGER Programming Voltage Adapter delivers two externally provided voltages to the target for programming targets with voltage requirements beyond 5 V. It can directly be inserted between the Flasher and the debug cable maintaining...
€98.00
*
emPower Zynq
Get the emPower Zynq Evaluation Board from SEGGER, helping developers evaluate software. emPower Zynq supports SEGGER’s integrated development environment (IDE), real-time operating system (RTOS), embOS. Also supported is emCompress,...
€98.00
*
embOS/IP Switch Board
embOS/IP Switch Board is intended to be mainly a demonstrator board for the Tail Tagging feature of SEGGER's embedded IP stack embOS/IP. Micrel/Microchip has developed switches which can expand one Ethernet port into 1+n fully...
€98.00
*
SiFive ARTY Trace Adapter
The SiFive ARTY Trace Adapter allows debug and trace connections between the J-Trace PRO and the ARTY board running SiFive RISC-V core bitstreams. The ARTY board provides several identical headers where the JD header is used as the debug...
€98.00
*
Viewed