Products from SEGGER

SEGGER
Close filters
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
4 From 10
No results were found for the filter!
Thumbnail_J_Link_BASE_Compact.png J-Link BASE Compact
Get the J-Link BASE Compact : the compact, BASE version of SEGGER’s J-Link debug probe family. Other top models of the J-Link family are J-Link PRO, PLUS and Ultra+. Designed to mount securely and unobtrusively into development or end...
From €398.00 *
Thumbnail_SEGGER_USB_Hub_1600x1400.png SEGGER USB Hub
The SEGGER USB Hub is an active seven-port, industrial grade USB hub that provides power for the Flasher Compact units and connects them to the Flasher Hub. Additional Product Information on segger.com
€398.00 *
Thumbnail_EmbeddedStudio_ARM_Maintenance_1600x1400.png Embedded Studio ARM edition – extension
Get a support extension for Embedded Studio for Arm and enjoy another year of technical support and updates with your license of perpetual use. Embedded Studio for Arm enables the efficient development of Arm-based devices, with support...
€396.00 *
Thumbnail_EmbeddedStudio_RISC_V_Maintenance_1600x1400.png Embedded Studio RISC-V edition – extension
Get the Embedded Studio for RISC-V support extension. Enjoy one year of technical support for the RISC-V development environment for devices based on RISC-V architecture. Whether designing your own chips or using an available device,...
€396.00 *
J_Trace_Isolator_800_700.png J-Trace Isolator
Standard .05" 19-pin Cortex-M connector to provide electrical isolation. Additional Product Information on segger.com
€298.00 *
Thumbnail_J_Link_BASE_Upgrade_PLUS.png J-Link Upgrade BASE to PLUS
Have a J-Link BASE and want to get an upgrade? The JTAG/SWD debug probe J-Link BASE, with its USB interface increases productivity with the J-Link BASE Upgrade. Already supporting a broad range of microcontrollers, J-Link BASE can...
€298.00 *
Thumbnail_EmbeddedStudio_Cortex_M_Maintenance_1600x1400.png Embedded Studio Cortex-M edition – extension
Get the one-year support extension for Embedded Studio for Cortex-M . Enjoy full technical & CPU support for the most widely-used microcontrollers. This could be Cortex-M based microcontrollers for small IoT wearables or anything in...
€296.00 *
Thumbnail_SystemView_Maintenance_1600x1400.png SystemView – extension
Have SystemView , and want to continue using its advanced features & and benefits? Then make sure to get the license extension and enjoy another year of support. For anyone developing and working with complex embedded systems that...
€296.00 *
SEGGER_NAND_Flash_Evaluator.png NAND Flash Evaluator
Get the SEGGER NAND Flash Evaluator board and enjoy an easy-to-use, cost-effective testing tool designed to evaluate the features and performance of the emFile NAND driver. The NAND Flash Evaluator board has significant advantages over...
€248.00 *
J_Link_JTAG_Isolator_800_700.png J-Link JTAG Isolator
JTAG-ARM connector to provide electrical isolation. Additional Product Information on segger.com
€198.00 *
J_Link_SWD_Isolator_800_700.png J-Link SWD Isolator
SWD-ARM connector to provide electrical isolation Additional Product Information on segger.com
€198.00 *
emPower_1600_1400.png emPower
Get emPower , the Software Evaluation Board from SEGGER, helping developers to accelerate the start of any project. This evaluation board supports SEGGER’s real-time operating system (RTOS), embOS. Other supported software components...
€198.00 *
4 From 10
Viewed