Close filters
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
2 From 4
No results were found for the filter!
Thumbnail_J_Link_BASE_Upgrade_PLUS.png J-Link Upgrade BASE to PLUS
Have a J-Link BASE and want to get an upgrade? The JTAG/SWD debug probe J-Link BASE, with its USB interface increases productivity with the J-Link BASE Upgrade. Already supporting a broad range of microcontrollers, J-Link BASE can...
€298.00 *
J_Link_JTAG_Isolator_800_700.png J-Link JTAG Isolator
JTAG-ARM connector to provide electrical isolation. Additional Product Information on segger.com
€198.00 *
J_Link_SWD_Isolator_800_700.png J-Link SWD Isolator
SWD-ARM connector to provide electrical isolation Additional Product Information on segger.com
€198.00 *
imx_rt1050_trace_reference_board_1000x1000.png NXP iMX RT1050 Trace Reference Board
iMX RT1050 Trace Reference Board iMX RT1050 ARM Cortex-M7 External debug header with trace pins Test points for trace signals The SEGGER iMX RT1050 Trace Reference Board is a simple hardware with an ARM Cortex-M7 based microcontroller,...
€198.00 *
800px_STM32H7_trace_reference_board.png STM32H7 Trace Reference Board
STM32H7 Trace Reference Board STM32H7 ARM Cortex-M7 External debug header with trace pins Test points for trace signals The SEGGER STM32H7 Trace Reference Board is a simple hardware with an ARM Cortex-M7 based microcontroller, that...
€198.00 *
Thumbnail_J_Link_EDU_Minis.png J-Link EDU Mini classroom package
Get the J-Link EDU Mini , offering the same functionality as the J-Link EDU but in a reduced form factor. The J-Link EDU mini Classroom Edition includes twelve J-Link EDU mini units on special offer. Designed for education purposes and...
€165.00 *
J_Trace_Mictor_38_Adapter_800_700.png J-Trace Mictor 38 Adapter
Adapts from 20-pin .05" Cortex trace connector to 38 pin Mictor connector. The pin out follows the single target connector pinout specification as defined in the ARM "ETM Architecture Specification". Additional Product Information on...
€148.00 *
J_Link_Mictor_38_Adapter_800_700.png J-Link Mictor 38 Adapter
Adapts from the standard J-Link 20-pin 0.1" target connector to Mictor 38-Pin connector. Additional Product Information on segger.com
€148.00 *
J_Link_USB_Isolator_800_700.png J-Link USB Isolator
J-Link USB connector to provide host side electrical isolation. Additional Product Information on segger.com
€148.00 *
J_Link_10_Pin_Needle_Adapter_1600_1400_01.png J-Link 10-pin Needle Adapter
Adapts from 20-pin, 0.1 inch Standard connector to 10-pin, 0.05 inch TAG-Connect needle pattern Additional Product Information on segger.com
€98.00 *
J_Link_rx14_Adapter_1600_1400_01.png RX Adapter
Adapts from .1" 20-pin Standard connector to 14-pin RX600 JTAG connector incl. .1" 14-pin cable Additional Product Information on segger.com
€98.00 *
J_Link_MeasurementPatch_Adapter_800_700.png Measurement+Patch Adapter
Adapter for non-standard J-Link Target connection including 10 jumper wires for manual setup Additional Product Information on segger.com
€98.00 *
2 From 4
Viewed