No results were found for the filter!
Adapts from 20-pin, 0.1 inch J-Link connector to 10-pin, 0.1 inch SiLabs 8051 C2 connector. Incl. 10-pin cable. Additional Product Information on segger.com
€68.00
*
The J-Link Target Supply Adapter provides a default voltage of 3.3 V to power the target using pin 19. The voltage can be adjusted by replacing resistors. Additional Product Information on segger.com
€68.00
*
Adapts from the standard 20 pin 0.1" J-Link connector to the 6-pin 0.1" AVR PDI connector, 6-pin 0.05‘‘ AVR PDI connector or 10-pin 0.1‘‘ AVR PDI connector. Additionally a 5V or 3.3V power supply for the target is integrated. Additional...
€68.00
*
Adapts from the standard 20 pin 0.1" J-Link connector to a 10-pin row, allowing to connect J-Link to target PCBs via flying wires. Especially useful when hooking up prototype HW where no final connector is decided yet. Or for manually...
€68.00
*
Adapter for ARM targets with 14-pin JTAG connector. Incl. 14-pin ribbon cable Additional Product Information on segger.com
€68.00
*
Adapts from .1" 20-pin Standard connector to 14-pin TI connector incl. 14-pin cable Additional Product Information on segger.com
€49.00
*
Adapts from 20-pin, 0.1 inch Standard connector to 14-pin, PPC connector incl. 14-pin cable Additional Product Information on segger.com
€49.00
*
Adapts from 20-pin, 0.1‘‘ standard J-Link connector to 14-pin, 0.1" RX FINE connector. Incl. 14-pin cable. Additional Product Information on segger.com
€49.00
*
Adapts from 20-pin, 0.1‘‘ standard J-Link connector to 20-pin, 2mm connector. Additional Product Information on segger.com
€49.00
*
The J-Link Signal Smoothing Adapter can be inserted between the J-Link debug probe and the debug target to overcome signal integrity issues. Additional Product Information on segger.com
€49.00
*
The Intel FPGA Adapter (formerly J-Link Altera Adapter) connects to the 10-pin Intel FPGA JTAG connector providing debug access to FPGA based MCU cores like the dual-core ARM Cortex-A9 in the Cyclone V devices. Incl. 10 pin ribbon cable...
€49.00
*
Adapts from the standard J-Link 20-pin 0.1" target connector to Xilinx 14 pin 2 mm connector (comp. Platform Cable USB II). Incl. 14 pin 1 mm ribbon cable Additional Product Information on segger.com
€49.00
*
Viewed