Close filters
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
2 From 5
No results were found for the filter!
Thumbnail_Flasher_ARM.png Flasher ARM
Get Flasher ARM , part of the Flasher family of reliable, high-speed production programmers from SEGGER. Flasher ARM is a programming tool designed for Arm core-based microcontrollers with on-chip and/or external flash memory. Once set...
€798.00 *
Thumbnail_SEGGER_USB_Hub_1600x1400.png SEGGER USB Hub
The SEGGER USB Hub is an active seven-port, industrial grade USB hub that provides power for the Flasher Compact units and connects them to the Flasher Hub. Additional Product Information on segger.com
€398.00 *
J_Link_JTAG_Isolator_800_700.png J-Link JTAG Isolator
JTAG-ARM connector to provide electrical isolation. Additional Product Information on segger.com
€198.00 *
J_Link_SWD_Isolator_800_700.png J-Link SWD Isolator
SWD-ARM connector to provide electrical isolation Additional Product Information on segger.com
€198.00 *
Relay_Adapter_1600_1400.png Relay Adapter
The Relay Adapter completely isolates Flasher signals from the target by means of relay contacts. Additional Product Information on segger.com
€198.00 *
J_Link_Mictor_38_Adapter_800_700.png J-Link Mictor 38 Adapter
Adapts from the standard J-Link 20-pin 0.1" target connector to Mictor 38-Pin connector. Additional Product Information on segger.com
€148.00 *
J_Link_USB_Isolator_800_700.png USB Isolator
J-Link USB connector to provide host side electrical isolation. Additional Product Information on segger.com
€148.00 *
J_Link_10_Pin_Needle_Adapter_1600_1400_01.png 10-pin Needle Adapter
Adapts from 20-pin, 0.1 inch Standard connector to 10-pin, 0.05 inch TAG-Connect needle pattern Additional Product Information on segger.com
€98.00 *
J_Link_rx14_Adapter_1600_1400_01.png RX Adapter
Adapts from .1" 20-pin Standard connector to 14-pin RX600 JTAG connector incl. .1" 14-pin cable Additional Product Information on segger.com
€98.00 *
J_Link_MeasurementPatch_Adapter_800_700.png Measurement+Patch Adapter
Adapter for non-standard J-Link Target connection including 10 jumper wires for manual setup Additional Product Information on segger.com
€98.00 *
J_Link_6_Pin_Adapter_1600_1400_01.png 6-pin Needle Adapter
Adapts from 20-pin, 0.1 inch J-Link connector to 6-pin, 0.05 inch needle pattern. Incl. 6-pin cable with legs. Additional Product Information on segger.com
€98.00 *
SEGGER_5V_Target_Supply_Adapter_800_700.png 5V Target Supply Adapter
The J-Link Target Supply Adapter provides a default voltage of 5 V to power the target using pin 19. The voltage can be adjusted by replacing resistors. Additional Product Information on segger.com
€98.00 *
2 From 5
Viewed