J-Link PRO PoE

J-Link PRO PoE is SEGGER's versatile JTAG/SWD programming and debug probe with USB and Ethernet interfaces.

€1,198.00*

Available, delivery time: 1-2 days

Support options
Part number: 8.12.28

Suitable accessories

Adapters
5V Target Supply Adapter

€98.00*

Available, delivery time: 1-2 days

Microchip LVP Adapter

€49.00*

Available, delivery time: 1-2 days

2mm Adapter

€49.00*

Available, delivery time: 1-2 days

Right Angle (RAFF) Adapter

€49.00*

Available, delivery time: 1-2 days

Measurement+Patch Adapter

€98.00*

Available, delivery time: 1-2 days

STDC 14 Adapter

€49.00*

Available, delivery time: 1-2 days

Intel FPGA Adapter

€49.00*

Available, delivery time: 1-2 days

MIPI-60 Adapter

€98.00*

Available, delivery time: 1-2 days

SiLabs C2 Adapter

€68.00*

Available, delivery time: 1-2 days

RX Adapter

€98.00*

Available, delivery time: 1-2 days

Xilinx Adapter

€49.00*

Available, delivery time: 1-2 days

19-Pin Cortex-M Adapter

€32.00*

Available, delivery time: 1-2 days

SiFive-ARTY Adapter

€49.00*

Available, delivery time: 1-2 days

14-Pin TI Adapter

€49.00*

Available, delivery time: 1-2 days

50-Mil 10-Pin Patch Adapter

€49.00*

Available, delivery time: 1-2 days

J-Link Mictor 38 Adapter

€148.00*

Available, delivery time: 1-2 days

Programming Voltage Adapter

€98.00*

Available, delivery time: 1-2 days

RX FINE Adapter

€49.00*

Available, delivery time: 1-2 days

ARM-14 Adapter

€68.00*

Available, delivery time: 1-2 days

Signal Smoothing Adapter

€49.00*

Available, delivery time: 1-2 days

Supply Adapter

€68.00*

Available, delivery time: 1-2 days

Relay Adapter

€198.00*

Available, delivery time: 1-2 days

6-pin Needle Adapter

€98.00*

Available, delivery time: 1-2 days

10-pin Needle Adapter

€98.00*

Available, delivery time: 1-2 days

Target Supply Adapter

€68.00*

Available, delivery time: 1-2 days

Microchip 2-Wire JTAG TDI Adapter

€49.00*

Available, delivery time: 1-2 days

9-Pin Cortex-M Adapter

€32.00*

Available, delivery time: 1-2 days

Flying Wire Adapter

€68.00*

Available, delivery time: 1-2 days

PPC 14-Pin Adapter

€49.00*

Available, delivery time: 1-2 days

Software add-ons
J-Link DSK

€1,980.00*

Available, delivery time: 1-2 days

J-Link DSK – extension

€980.00*

Available, delivery time: 1-2 days

J-Link SDK

€1,980.00*

Available, delivery time: 1-2 days

J-Link SDK – extension

€980.00*

Available, delivery time: 1-2 days

SystemView
SystemView

€1,480.00*

Available, delivery time: 1-2 days

Flasher
Flasher PRO

€998.00*

Available, delivery time: 1-2 days

Accessories
Mounting brackets

From €18.00*

Available, delivery time: 1-2 days

Product information "J-Link PRO PoE"

Get the J-Link PRO PoE, the specialized high-end debug probe for test farms

J-Link PRO PoE features a PoE-enabled Ethernet interface as an alternative to the USB connection, specifically to reduce the size of a cable harness in test farms. Easily check hardware status thanks to two additional LEDs. Connects via Ethernet or USB to the host. Cross-platform, it runs on Windows, Linux, and macOS.


Further advantages

J-Link PRO PoE includes a web interface (web server) for easy TCP/IP configuration and integrated licenses for unlimited breakpoints in flash memory, RDI/RDDI & Flash. There is also built-in VCOM functionality, supporting a broad range of CPUs and microcontrollers.
J-Link debug probes are supported by all major IDEs including Eclipse, GDB-based IDEs and SEGGER Embedded Studio. Find a complete list of Supported IDEs here.


Package content

  • J-Link PRO PoE debug probe
  • USB cable
  • .1" 20-pin ribbon cable (18 cm)


Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.


For additional product information, please visit segger.com.

Host Interface: Ethernet, Ethernet-PoE, USB
Software Features: Flash Download, GDB Server, J-Flash / J-Flash SPI, Ozone, RDDI, RDI, Real-Time Transfer (RTT), Unlimited Flash Breakpoints
Supported Targets: ARM Cortex Cores, ARM legacy Cores, Microchip PIC32, RISC-V , Renesas RX, SiLabs 8051
Target Interface: FINE, ICSP, JTAG, Power via USB, SWD, SWO, cJTAG
Target Interface Speed: High (4 MB/s)
Trace Interface: ETB Trace

Similar products

8.12.00M
J-Link PRO
Get the J-Link PRO, a refined version of the standard J-Link. Working “out-of-the-box”, it uses DHCP per default. Includes an Ethernet interface in addition to the USB interface, meaning the debug probe can be used far away from the PC, either over a hardwired or wireless network. Easily check hardware status thanks to two additional LEDs. Connects via Ethernet or USB to the host. Cross-platform, it runs on Windows, Linux & macOS. Further advantagesJ-Link PRO includes a web interface (web server) for easy TCP/IP configuration and integrated licenses for unlimited breakpoints in flash memory, RDI/RDDI & J-Flash. There is also built-in VCOM functionality, supporting a broad range of CPUs and microcontrollers. J-Link debug probes are supported by all major IDEs including Eclipse, GDB-based IDEs and SEGGER Embedded Studio. Find a complete list of Supported IDEs here. Package content J-Link PRO debug probe USB cable .1" 20-pin ribbon cable (18 cm) Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible. For additional product information, please visit segger.com.

From €998.00*
8.16.28M
J-Link ULTRA+
Get the J-Link ULTRA+, an ultra-fast debug probe for JTAG/SWD and superset of J-Link PLUS. 100% compatible with J-Link PLUS – and even faster! Make the switch and enjoy faster download speeds of up to 3 Mbyte/s. Comes with integrated licenses for: Unlimited breakpoints in flash memory, Ozone & J-Flash Free software updates Also includes: ARM Remote Debug Interface (RDI), remote GDB server for the GNU Project Debugger (GDB Server), Flash Loaders, and software to program internal and external flash of your microcontroller (J-Flash). The J-Link debug probes are supported by all major IDEs: Eclipse, GDB-based IDEs and SEGGER Embedded Studio. For a complete list, please refer to Supported IDEs.Further advantagesJ-Link Ultra+ comes built-in VCOM functionality. Supports direct download into flash memory & RAM. Includes a broad range of supported CPUs and microcontrollers. No power supply needed; driven and powered by USB. Package content J-Link ULTRA+ debug probe USB cable .1" 20-pin ribbon cable (18 cm) Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible. For additional product information, please visit segger.com.

From €798.00*
8.14.28M
J-Link WiFi
Get the J-Link WiFi, a JTAG/SWD debug probe with WiFi interface. Communicates at high speed (up to 15MHz) with supported target CPUs. Need a wireless debug interface? Then J-Link WiFi is the perfect solution – for example if the target is moving or needs to be shielded from the environment. Powered by USB, it uses the same source of power as the target device. All major IDEs including Eclipse, GDB-based IDEs and SEGGER Embedded Studio support J-Link debug probes. Take a look at the complete list of Supported IDEs. With over 500,000 J-Link shipped so far, it is probably the most popular debug probe for ARM cores and the de-facto standard. Further advantagesJ-Link WiFi includes a web interface making for easy TCP/IP configuration (built-in webserver). There are also integrated licenses for unlimited breakpoints in flash memory, RDI/RDDI, and J-Flash. It additionally provides J-Link debugging for mobile applications as well as built-in VCOM functionality, supporting a broad range of microcontrollers & CPUs.Package content J-Link WiFi debug probe USB cable .1" 20-pin ribbon cable (18 cm) Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible. For additional product information, please visit segger.com.

From €998.00*
8.08.28M
J-Link PLUS Classic
Get the J-Link PLUS, a high-speed USB 2.0 driven JTAG/SWD debug probe with USB interface. Based on a 32-bit RISC CPU, communicates at high speed with supported target CPUs. Supports a large number of CPU cores and microcontrollers.All major IDEs including Eclipse & GDB-based IDEs support J-Link debug probes. So does SEGGER Embedded Studio. With 500,00 J-Links shipped so far, it is the most popular debug probe for ARM cores and the de-facto standard.Further advantagesJ-Link PLUS has built-in VCOM functionality, with integrated licenses for unlimited breakpoints in flash memory, RDI/RDDI & J-Flash. Direct download into RAM & flash memory is also supported. It is available in two form factors: J-Link PLUS & J-Link PLUS Compact (functions identical). Package content J-Link PLUS debug probe USB cable .1" 20-pin ribbon cable (18 cm) Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible. For additional product infromation, please visit segger.com.

From €598.00*
Bestseller
8.19.28M
J-Link PLUS Compact
Get the J-Link PLUS Compact debug probe; a compact version of the J-Link PLUS. Mounts securely & unobtrusively into development and end user equipment. Based on 32-bit RISC CPU, it communicates at high speed with supported target CPUs. Thanks to a small size with two mounting holes, it can be placed into existing equipment housings. Space can also be reserved for direct-to-PCB mounting.All major IDEs (Eclipse & GDB-based IDEs) support J-Link debug probes, as does SEGGER Embedded Studio. More than 500,000 J-Links have been shipped so far, making this probably the most popular debug probe on the market for ARM cores and the de-facto standard.Further advantagesThe J-Link PLUS Compact has a built-in VCOM functionality and integrated licenses for unlimited breakpoints in flash memory, RDI/RDDI, and J-Flash. It supports direct download into RAM and flash memory. It has a broad range of supported microcontrollers and CPUs.Package content J-Link PLUS Compact debug probe USB cable .1" 20-pin ribbon cable (18 cm) Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.For additional product information, please visit segger.com.

From €598.00*
8.08.00M
J-Link BASE Classic
Get the J-Link BASE – the BASE version of the market leading debug probe family. Other top models of the J-Link family are J-Link PRO, PLUS & ULTRA+. Powered by a USB, J-Link BASE supports a wide range of CPU cores and microcontrollers. Used worldwide for development and production (flash programming), it is based on a 32-bit RISC CPU and can communicate at high speed with supported target CPUs.J-Link debug probes are supported by all major IDEs. These include GDB-based IDEs and SEGGER Embedded Studio. Take a look here to view the complete list of Supported IDEs.Further advantagesJ-Link BASE has built-in VCOM functionality. It is also available in a compact version: the J-Link BASE Compact.Including all models, more than 500,000 J-Links have been shipped so far, making J-Link probably the most popular debug probe for ARM cores and the de-facto standard. Package content J-Link Base debug probe USB cable .1" 20-pin ribbon cable (18 cm) Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible. For additional product information, please visit segger.com.

From €398.00*
8.19.00M
J-Link BASE Compact
Get theJ-Link BASE Compact: the compact, BASE version of SEGGER’s J-Link debug probe family. Other top models of the J-Link family are J-Link PRO, PLUS, and Ultra+. Designed to mount securely and unobtrusively into development or end user equipment. Small in size and with two mounting holes, this means J-Link BASE Compact can be placed into existing equipment housings or reserve space for direct-to-PCB mounting.Powered by USB, J-Link BASE is a JTAG debug probe that supports a wide range of CPU cores and microcontrollers. It is based on a 32-bit RISC CPU, with an ability to communicate at high speed with supported target CPUs. Worldwide, J-Link is used by the thousands for flash programming.The J-Link debug probes are supported by all major IDEs including Eclipse, GDB-based IDEs and SEGGER Embedded Studio. For a complete list, please refer to Supported IDEs. Including all models, more than 500,000 J-Links have been shipped so far, making J-Link probably the most popular debug probe for ARM cores and the de-facto standard.Further advantagesJ-Link BASE Compact has built-in VCOM functionality.J-Link BASE is available in two form factors with identical function: J-Link BASE and J-Link BASE Compact.Package content J-Link BASE Compact debug probe USB cable .1" 20-pin ribbon cable (18 cm) Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible. For additional product information, please visit segger.com.

From €398.00*