Filter
Bestseller
8.24.00M
J-Trace PRO
Get the J-Trace
PRO, the superspeed trace probe that is designed to support the advanced tracing features of all popular cores
and architectures. With its superspeed USB 3.0 interface, J-Trace PRO enables continuous streaming trace via USB with full trace clock. This lifts the limits from internal buffers, slowing data transmission to provide the insights a developer needs to optimize code.
With J-Trace PRO, complete traces can be captured over long periods. This enables the recording of infrequent,
hard-to-reproduce bugs. It is particularly helpful when the program flow ‘runs off the rails’ and stops in a fault
state. SuperSpeed USB 3.0 driven debug probe supporting unlimited streaming trace for Cortex-M, Cortex-R, Cortex-A, and RISC-V devices, 64 MB on-board trace buffer
Up to 4.0 MB/s download speedThe J-Trace PRO software package includes:
J-Flash / J-Flash SPI
J-Link Unlimited Flash Breakpoints
Ozone - The J-Link Debugger
Monitor mode
J-Link ARM RDI / RDDI
Package content
Cortex-M Trace Reference Board
.05" 20-pin debug & trace cable
.1" 20-pin ribbon cable (18 cm)
USB 3.0 cable
Micro USB cable
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.For additional product
information, pleace visit segger.com.
8.20.00M
J-Trace PRO Cortex
Get the J-Trace PRO Cortex, the superspeed trace probe that provides support
for Cortex-A/R/M-based microcontrollers. With its superspeed USB 3.0 interface, J-Trace PRO Cortex enables
continuous streaming trace via USB with full trace clock. This lifts the limits from internal buffers, slowing data
transmission to provide the insights a developer needs to optimize code.With J-Trace PRO, complete traces can
be captured over long periods. This enables the recording of infrequent, hard-to-reproduce bugs. It is particularly
helpful when the program flow ‘runs off the rails’ and stops in a fault state. SuperSpeed USB 3.0
driven debug probe supporting unlimited streaming trace for RISC-V devices, 64 MB on-board trace buffer. Up to 4.0 MB/s download
speed
Includes:
Streaming trace probe with USB Superspeed interface
Real-time streaming at full system clock
Tune your application with live profiling
Satisfy regulatory requirements with instruction-level code coverage
Isolate and Identify hard-to-find code defects with unlimited trace
Supports streaming trace
Supports Cortex-A/R/M targets
Full J-Link debug functionality
Further advantagesIt also supports extended trace features, such as code
coverage (so engineers have visibility over which parts of the application code have been executed) and execution
profiling (providing visibility as to which instructions have been executed and how often—so hotspots can be
addressed and optimization opportunities identified).Package content
J-Trace PRO trace probe
Cortex-M Trace Reference Board
.05" 20-pin debug & trace cable
.1" 20-pin ribbon cable (18 cm)
USB 3.0 cable
Mini USB cable
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.
For additional
product information, please visit segger.com.
8.22.00M
J-Trace PRO RISC-V
Get the J-Trace PRO RISC-V, the superspeed trace probe that provides support
for RISC-V-based microcontrollers. With its superspeed USB 3.0 interface, J-Trace PRO RISC-V enables
continuous streaming trace via USB with full trace clock. This lifts the limits from internal buffers, slowing data
transmission to provide the insights a developer needs to optimize code.With J-Trace PRO, complete traces can
be captured over long periods. This enables the recording of infrequent, hard-to-reproduce bugs. It is particularly
helpful when the program flow ‘runs off the rails’ and stops in a fault state. SuperSpeed USB 3.0
driven debug probe supporting unlimited streaming trace for RISC-V devices, 64 MB on-board trace buffer. TestUp to 4.0 MB/s
download speedIncludes:
J-Flash / J-Flash SPI
J-Link Unlimited Flash Breakpoints
Ozone - The J-Link Debugger
Monitor mode
Further advantagesIt also supports extended trace features, such as code
coverage (so engineers have visibility over which parts of the application code have been executed) and execution
profiling (providing visibility as to which instructions have been executed and how often—so hotspots can be
addressed and optimization opportunities identified).
Package content
J-Trace PRO trace probe
.05" 20-pin debug & trace cable
.1" 20-pin ribbon cable (18 cm)
USB 3.0 cable
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.For additional product information, please visit segger.com.
8.08.06
J-Link SDK
Get J-Link SDK, allowing customers
to integrate J-Link support into their own applications.
Used in a number of professional IDEs like IAR EWARM or KEIL uVision, it
allows for debugging directly via a J-Link – as well as in customized production utilities.With J-Link SDK,
users can take advantage of full J-Link functionality. This includes its integrated flash programming capabilities
which allow for high-speed flash programming on all supported devices – without the need to create a custom
flash-loader.Users also get complete control of the target (run, halt, reset, step). They can also set
breakpoints and watchpoints (including setting Unlimited Flash Breakpoints). High-Speed Sampling, the SEGGER
Real-Time Terminal, SWO and Simple Trace can be used directly in the application. It also enables low-level
communication with the target via JTAG commands.Further detailsWhat are some typical applications that can be used with
J-Link? These include complete debuggers or additional debugger utilities like data visualizers, customized flash
programming utilities (to be used in production) and automated test applications.J-Link SDK is cross-platform,
available for Windows, Linux & macOS.Developer Pack DLL for J-Linkincl. 6 months free updates/supportCompany
wide license
For additional product information, please visit segger.com.
8.08.29
J-Link DSK
Get J-Link DSK, SEGGER’s Device
Support Kit for J-Link / J-Trace.A new device usually requires a
flashloader and in some cases also a script defining special connect and reset sequences, required by the device.
While SEGGER maintains the updating of J-Link software with new devices, some devices might be left out in the
process. To enable customers filling in the gaps on their own, the J-Link DSK is offered. To make creating support
as easy as possible, the J-Link DSK comes with the SEGGER Flash Loader (SFL) as well as a set of example script
files for various devices that require special handling.Further advantages
Available for most cores currently supported by J-Link
Enables ultra-high speed programming of devices not yet added to the support database
Device Support Kit for J-Link / J-TraceIncludes 6 months free
updates/support (2h)Company-wide licenseFor additional product
information, please visit segger.com.
8.18.00M
J-Trace PRO Cortex-M
Get theJ-Trace
PRO for Cortex-M, the leading trace probe that is setting a new standard for trace probes. Thanks to its
advanced capabilities, it enables continuous streaming trace and lifts the limitations by internal buffers, slowing
data transmission to provide those valuable insights that let developer optimize code.J-Trace PRO captures
complete trace over long periods, allowing the recording of bugs that are infrequent and hard to reproduce. This is
especially helpful when the program flow “runs off the rails” and stops in a fault state.Up to 4.0 MB/s download speed
Further advantagesThe
J-Trace PRO Cortex-M supports extended trace features: Code coverage (visibility over which parts of the code have
been executed) and execution profiling (visibility as to which instructions have been executed & how often).
Package content
J-Trace PRO trace probe
Cortex-M Trace Reference Board
.05" 20-pin debug & trace cable
1" 20-pin ribbon cable (18 cm)
Mini USB cable
USB 3.0 cable
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.
For additional
product information, please visit segger.com.
8.12.28M
J-Link PRO PoE
Get the J-Link PRO PoE, the specialized
high-end debug probe for test farms J-Link PRO PoE features a PoE-enabled Ethernet interface as an alternative
to the USB connection, specifically to reduce the size of a cable harness in test farms. Easily check hardware
status thanks to two additional LEDs. Connects via Ethernet or USB to the host. Cross-platform, it runs on Windows,
Linux, and macOS. Further advantagesJ-Link PRO
PoE includes a web interface (web server) for easy TCP/IP configuration and integrated licenses for unlimited breakpoints in flash memory, RDI/RDDI
& Flash. There is also built-in VCOM functionality, supporting a broad range of CPUs and microcontrollers.J-Link
debug probes are supported by all major IDEs including Eclipse, GDB-based IDEs and SEGGER
Embedded Studio. Find a complete list of Supported IDEs here. Package content
J-Link PRO PoE debug probe
USB cable
.1" 20-pin ribbon cable (18 cm)
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.For additional product information, please visit segger.com.
8.12.00M
J-Link PRO
Get the J-Link
PRO, a refined version of the standard J-Link. Working “out-of-the-box”, it uses DHCP per default. Includes an Ethernet interface in addition to the USB interface, meaning the debug probe can be used far away from the PC, either over a hardwired or wireless network. Easily check hardware status thanks to two additional LEDs. Connects via Ethernet or USB to the host. Cross-platform, it runs on Windows, Linux & macOS.
Further advantagesJ-Link PRO includes a web interface (web server) for easy
TCP/IP configuration and integrated licenses for unlimited breakpoints in flash
memory, RDI/RDDI & J-Flash. There is
also built-in VCOM functionality, supporting a broad range of CPUs and microcontrollers. J-Link debug probes
are supported by all major IDEs including Eclipse, GDB-based IDEs and SEGGER Embedded
Studio. Find a complete list of Supported IDEs here. Package content
J-Link PRO debug probe
USB cable
.1" 20-pin ribbon cable (18 cm)
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.
For additional product information, please visit segger.com.
8.14.28M
J-Link WiFi
Get the J-Link WiFi, a JTAG/SWD debug
probe with WiFi interface. Communicates at high speed (up to 15MHz) with supported target CPUs. Need
a wireless debug interface? Then J-Link WiFi is the perfect solution – for example if the target is moving or needs
to be shielded from the environment. Powered by USB, it uses the same source of power as the target device.
All major IDEs including Eclipse, GDB-based IDEs and SEGGER
Embedded Studio support J-Link debug probes. Take a look at the complete list of Supported IDEs. With
over 500,000 J-Link shipped so far, it is probably the most popular debug probe for ARM cores and the de-facto
standard. Further advantagesJ-Link WiFi
includes a web interface making for easy TCP/IP configuration (built-in webserver). There are also integrated
licenses for unlimited breakpoints in flash memory, RDI/RDDI,
and J-Flash. It additionally provides J-Link debugging for mobile applications as
well as built-in VCOM functionality, supporting a broad range of microcontrollers & CPUs.Package content
J-Link WiFi debug probe
USB cable
.1" 20-pin ribbon cable (18 cm)
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.
For additional
product information, please visit segger.com.
8.08.18
J-Link SDK – extension
J-Link SDK one year Support and Update Agreement extension.Can only
be purchased by customers with a J-Link SDK License (Model 8.08.06).Additional Product
Information on segger.com
8.08.31
J-Link DSK – extension
J-Link DSK one year Support (2h) and Update Agreement extension
Can only be purchased by customers with a J-Link DSK License (Model 8.08.29)
8.16.28M
J-Link ULTRA+
Get the J-Link ULTRA+, an ultra-fast debug
probe for JTAG/SWD and superset of J-Link PLUS. 100% compatible with
J-Link PLUS – and even faster! Make the switch and enjoy faster download speeds of up to 3 Mbyte/s. Comes with
integrated licenses for:
Unlimited breakpoints in flash
memory, Ozone & J-Flash
Free software updates
Also includes: ARM Remote Debug Interface (RDI), remote GDB server for the GNU Project Debugger (GDB Server), Flash Loaders, and software to
program internal and external flash of your microcontroller (J-Flash). The J-Link debug probes are supported by all
major IDEs: Eclipse, GDB-based IDEs and SEGGER Embedded Studio. For a complete list, please refer to Supported IDEs.Further advantagesJ-Link
Ultra+ comes built-in VCOM functionality. Supports direct download into flash memory & RAM. Includes a broad
range of supported CPUs and microcontrollers. No power supply needed; driven and powered by USB. Package content
J-Link ULTRA+ debug probe
USB cable
.1" 20-pin ribbon cable (18 cm)
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.
For additional
product information, please visit segger.com.
8.08.28M
J-Link PLUS Classic
Get the J-Link PLUS, a high-speed USB
2.0 driven JTAG/SWD debug probe with USB interface. Based on a 32-bit RISC CPU, communicates at high speed with supported
target CPUs. Supports a large number of CPU cores and microcontrollers.All major IDEs including Eclipse &
GDB-based IDEs support J-Link debug probes. So does SEGGER Embedded Studio. With 500,00 J-Links shipped so far, it
is the most popular debug probe for ARM cores and the de-facto standard.Further advantagesJ-Link
PLUS has built-in VCOM functionality, with integrated licenses for unlimited breakpoints in flash memory, RDI/RDDI
& J-Flash. Direct download into RAM & flash memory is also supported. It is available in two form factors:
J-Link PLUS & J-Link PLUS Compact (functions identical).
Package content
J-Link PLUS debug probe
USB cable
.1" 20-pin ribbon cable (18 cm)
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.
For additional product infromation, please visit segger.com.
Bestseller
8.19.28M
J-Link PLUS Compact
Get the J-Link PLUS Compact debug probe; a
compact version of the J-Link PLUS. Mounts securely & unobtrusively into development and end user
equipment. Based on 32-bit RISC CPU, it communicates at high speed with supported target CPUs. Thanks to a small
size with two mounting holes, it can be placed into existing equipment housings. Space can also be reserved for
direct-to-PCB mounting.All major IDEs (Eclipse & GDB-based
IDEs) support J-Link debug probes, as does SEGGER Embedded Studio. More than
500,000 J-Links have been shipped so far, making this probably the most popular debug probe on the market for ARM
cores and the de-facto standard.Further advantagesThe J-Link PLUS Compact has a built-in VCOM functionality
and integrated licenses for unlimited breakpoints in flash memory, RDI/RDDI, and J-Flash. It supports
direct download into RAM and flash memory. It has a broad range of supported microcontrollers and CPUs.Package content
J-Link PLUS Compact debug probe
USB cable
.1" 20-pin ribbon cable (18 cm)
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.For additional product information, please visit segger.com.
8.08.00M
J-Link BASE Classic
Get the J-Link BASE – the BASE version
of the market leading debug probe family. Other top models of the J-Link family are J-Link PRO, PLUS & ULTRA+.
Powered by a USB, J-Link BASE supports a wide range of CPU cores and microcontrollers. Used worldwide for
development and production (flash programming), it is based on a 32-bit RISC CPU and can communicate at high speed
with supported target CPUs.J-Link debug probes are supported
by all major IDEs. These include GDB-based IDEs and SEGGER Embedded Studio. Take a look here to view the complete
list of Supported IDEs.Further advantagesJ-Link BASE has built-in VCOM functionality. It is also
available in a compact version: the J-Link BASE Compact.Including all models, more than 500,000 J-Links have
been shipped so far, making J-Link probably the most popular debug probe for ARM cores and the de-facto standard.
Package content
J-Link Base debug probe
USB cable
.1" 20-pin ribbon cable (18 cm)
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.
For additional product information, please visit segger.com.
8.19.00M
J-Link BASE Compact
Get theJ-Link
BASE Compact: the compact, BASE version of SEGGER’s J-Link debug probe family. Other top models of
the J-Link family are J-Link PRO, PLUS, and Ultra+. Designed to mount securely and unobtrusively into
development or end user equipment. Small in size and with two mounting holes, this means J-Link BASE Compact can be
placed into existing equipment housings or reserve space for direct-to-PCB mounting.Powered by USB, J-Link BASE
is a JTAG debug probe that supports a wide range of CPU cores and microcontrollers. It is based on a 32-bit RISC
CPU, with an ability to communicate at high speed with supported target CPUs. Worldwide, J-Link is used by the
thousands for flash programming.The J-Link debug probes are supported by all major IDEs including Eclipse,
GDB-based IDEs and SEGGER Embedded Studio. For a complete list, please refer to Supported IDEs. Including all models, more than 500,000
J-Links have been shipped so far, making J-Link probably the most popular debug probe for ARM cores and the de-facto
standard.Further advantagesJ-Link BASE Compact has built-in VCOM functionality.J-Link
BASE is available in two form factors with identical function: J-Link BASE and J-Link BASE Compact.Package content
J-Link BASE Compact debug probe
USB cable
.1" 20-pin ribbon cable (18 cm)
Includes free software updates and 1 (one) year of Basic support. Beyond that, SEGGER's Extended Coverage gives you the option to extend hardware warranty and Basic support for one additional year (+12 months) or two additional years (+24 months). These options are only available at the time of purchase. Adding it at a later date is not possible.
For additional
product information, please visit segger.com.
8.07.10
J-Trace Isolator
Standard .05" 19-pin Cortex-M connector to provide electrical
isolation.For additional product information, please visit segger.com.
8.08.13
J-Link Upgrade BASE to PLUS
Have a J-Link BASE and want to get an
upgrade? The
JTAG/SWD debug probe J-Link BASE, with its USB interface increases productivity with the J-Link BASE Upgrade.
Already supporting a broad range of microcontrollers, J-Link BASE can already work on multiple CPUs, supporting
8051, PIC32, RX, ARM7/9/11, Cortex-M/R/A, RISC-V with a download speed of up to 1Mbytes. It also supports unlimited
breakpoints in flash memory (with an additional license) and has built-in VCOM functionality.With the J-Link
BASE Upgrade, users can also get J-Flash / J-Flash SPI software, the Ozone Performance Debugger & Analyzer, RDI
& RDDI.Further advantagesThe J-Link BASE to PLUS upgrade comes with a software bundle that includes the J-Flash / J-Flash SPI license, software to program EEPROM and flash chips in ARM systems and a J-Link Unlimited Flash Breakpoints license. Included is also the Ozone J-Link Debugger & Performance Analyzer, Monitor Mode, J-Link ARM RDI / RDDI license and the license pack for the RDI / RDDI interface. Additionally, customers receive 6 months of free support and updates.
For additional information, please visit segger.com.
8.07.00
JTAG Isolator
JTAG-ARM connector to provide electrical isolation.For additional product information, please visit segger.com.
8.07.01
SWD Isolator
SWD-ARM connector to provide electrical isolationFor additional product information, please visit segger.com.
6.68.19
NXP iMX RT1050 Trace Reference Board
iMX RT1050 Trace Reference Board
iMX RT1050
ARM Cortex-M7
External debug header with trace pins
Test points for trace signals
The SEGGER
iMX RT1050 Trace Reference Board is a simple hardware with an ARM Cortex-M7 based microcontroller supporting the
Embedded Trace Macrocell (ETM). Its prime purpose is to quickly set up a reference project for instruction tracing
and live code coverage and profiling.For additional product information, please visit segger.com.
6.68.20
STM32H7 Trace Reference Board
STM32H7 Trace Reference Board
STM32H7
ARM Cortex-M7
External debug header with trace pins
Test points for trace signals
The SEGGER STM32H7 Trace Reference Board is a simple hardware with an ARM Cortex-M7 based microcontroller supporting the Embedded Trace Macrocell (ETM). Its primary purpose is to quickly set up a reference project for instruction tracing
and live code coverage and profiling.For additional product information, please visit segger.com.
8.06.21
J-Trace Mictor 38 Adapter
Adapts from 20-pin .05" Cortex trace connector to 38 pin Mictor
connector.The pin out follows the single target connector
pinout specification as defined in the ARM "ETM Architecture Specification".For additional product information, please visit segger.com.
8.06.08
J-Link Mictor 38 Adapter
Adapts from the standard J-Link 20-pin 0.1" target connector to Mictor
38-Pin connector.For additional product information, please visit segger.com.